User Guide

144
User Menu
User Menu
Call Up / Exit User Settings Menu
After calling up the User Menu, the following Basic Settings
can be set up in two levels according to your personal prefer-
ence.
First level:
(3 - Speed dependent volume control (GAL)
!,3 - Adjusting telephone function settings
,+ - Adjustment of Blinking Diode
F - Adjustment for optimising reception
(= - Adjustment of Navigation Announcements
<? - Adjustment of the AUX input
Second level:
47 - Adjustment of the Compass Display
,# - Adjustment of signal tone volume
The User Menu is called up by pressing the button
for more than 2 seconds.
To access the second level of the User Menu, press the multi-
function button .
To exit the User Settings menu, press the button
again.
Setting the GAL (Gal)
The GAL is a car radio control circuit, which automatically
adjusts the car radio volume according to vehicle speed. This
results in compensation of the driving noise produced at high-
er speeds.
Call up User Menu. Press the multifunction button .
With the right rotary control select between
and R.
With the GAL setting, the start of volume adjustment can be
specified according to vehicle speed.
The setting is stored automatically.
Explanation:
- No volume increase
R - Volume increase begins at low vehicle speed
R - Volume increase begins at higher vehicle speed
6281'
)EAP
(3 !,3 ,+ F (= <? SM
SM
6281'
(3
)EAP
(3 !,3 ,+ F (= <? SM