User Guide
147
User Menu
Display Compass
When the Route Guidance is not active, a compass can be
shown on the right side of the display.
To set, call up User Menu. By pressing the multifunction but-
ton , call up the 2nd level of the User Menu. Using the
multifunction button select either
:/6> *647(::
(Compass is displayed) and /0+,*647(:: (Compass is not
displayed).
If the compass display is switched off and Route Guidance is
not currently active, radio station abbreviations can be as-
signed to 9 multifunction buttons in FM - DAS mode.
The setting is stored automatically.
Signal Tone Volume
With this function, the volume of signal tones (e.g. storage
confirmation) can be set.
To adjust, call up User Menu. By pressing the multifunction
button , call up the 2nd level of the User Menu. Press
the multifunction button . With the right rotary
control select either
(Quiet) or R (Loud).
The setting is stored automatically.
SM
47
0%,4 ,*-00
47
,# LS
SM
,#
""-,)FAQ
47
,# LS
3,9;,,7