User manual

83
NAVIGATION MODE >>>
The following settings are available.
> Confirm your selection by pressing the
button.
The Blocked roads button
In the Blocked roads settings window
you can unblock previously permanently
blocked roads (See "Blocking a section of
the road permanently" on page 130) or
modify the block (time and days of week
of block).
> In the settings menu, press the
Blocked roads button.
A window is displayed containing the
roads that have previously been blocked.
Setting Meaning
Show signs Select whether speed
limits are never
displayed, always
displayed or only
displayed if the limit is
exceeded. Furthermore,
you can select whether
the sign should blink
when exceeding the
speed limit, by selecting
Always or If speed limit
is exceeded
.
In city Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Out of city Select the amount over
the speed limit at which
you would like to receive
an acoustic warning
within built-up areas.
Alert
An audible signal is to
sound when exceeding
speed limits.
Voice
output
A speaker’s voice warns
you of exceeding the
speed limit.
Setting Meaning
Note:
To delete all blocked roads from the list,
press the
Delete all blockings button
followed by the
Yes button in the display
that then appears.