Operation Manual

60
>>> NAVIGATION MODE
Simulation of the route
There is a play button on the left
under the map, used to start a simulation
of the route.
If you touch the display after starting, a
control bar is displayed at the top with
control buttons for the simulation. You
can pause the simulation with the
button, and continue it with the
button. The button allows you to
fast forward the simulation by a 16x
speed. You can move from route section
to route section with the and
buttons.
If there is no further action, the control
bar disappears after a few seconds.
Creating a new route
> Drücken Sie in der Routenplanung die
Taste
Create new route.
You can now enter an intermediate des-
tination as described under "The New
destination menu" on page 43 (
Enter ad-
dress
, Select from last destinations, Se-
lect Point of Interest
, Travel Guide, Con-
tacts, Personal destinations
, Select on
map
or Enter geo-coordinates). You also
have the option of quickly selecting a
destination using the
Select from last
destinations
button.
> In the input menu, press the
OK button
to accept the relevant intermediate
destination.
Notice (depending on model):
Here you can define a loading time.
This, in turn, has an impact on the calcu-
lations of the arrival time for the subse-
quent destinations of the route.
> Enter the loading time in hours and
minutes using the buttons.
If you do not want to set any loading
time, press the
No loading time button.