Operation Manual

75
NAVIGATION MODE >>>
The Traffic Button (model dependent)
When the navigation device has access
to the server, the heading
Traffic and an-
other icon are displayed instead of TMC.
The traffic announcements will always
then be retrieved updated from the serv-
er. The settings are the same as de-
scribed in the chapter entitled TMC.
The Voice guidance button
In the Voice guidance settings window
you can make settings relating to the
voice guidance of the Navigation device.
> Press the
Voice guidance button in the
settings menu.
The
Voice guidance settings window
appears.
The following setting options are then
available:
•
Voice
You can select the voice that will make
the navigation announcements for the
language that has been set.
•
Volume
You can select the standard volume for
voice announcements for each start of
the Navigation device, or switch off
voice announcements completely.
•
Interior noise level
With the Interior noise level button,
you can adjust the speed-dependent
volume control. To do this, select the
interior volume level suitable for your
vehicle.
With the
Dynamic setting (selected
models), the interior noise is meas-
ured with the aid of the integrated mi-
crophone, the volume is then
continually adjusted depending on the
noise level.
Notice:
The data transmission via your mobile
phone may involve additional costs de-
pending on the mobile phone contract.
Please find out from your mobile phone
provider before activating. If a connec-
tion to the server is not possible, e.g. be-
cause no mobile phone network is
available for a longer period of time,
then the system switches over auto-
matically to TMC until a connection to
the server is possible again.
Notice:
If the announcements of you navigation
device are too loud at high speed, you
should select a quieter interior noise. If
the announcements are too quiet, you
should select a louder interior noise.