Operation Manual

82
>>> NAVIGATION MODE
> Press the Extra-urban button to enter
the average fuel consumption of the
vehicle outside cities. This can be
entered as described for the In city
value.
> Press the
Type of engine button to set
your engine type. The display changes
by pressing the button repeatedly. You
can select Petrol, Diesel and Hybrid as
the engine type.
> Press on the
Fuel economy button to
change to the consumption unit. Pres-
sing this button repeatedly will change
the display. You can choose from the
consumption units l/100 km, MPG (UK)
and MPG (US).
The Format button
In the Format settings window you can
set the measurement units to be used
for times and distances.
> In the settings menu, press the
Format
button.
The
Format settings window appears.
> Press the
Time button to switch be-
tween the 12 hour clock and the
24 hour clock.
> Press the
Distance button to switch
between kilometres and miles.
> Confirm your settings by pressing the
button.
The Time button
You can select the time zone relevant for
your location in the
Time settings
window. This setting is important for the
correct calculation of the estimated time
of arrival.
> Press
Time in the settings menu.
The
Time settings window appears.
Using the
Time zone you can set whether
the time zone should be set automati-
cally by the Navigation device or not (
Use
auto time zone
on or Use auto time
zone
off ).
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
Use auto time
zone
.