Courtesy of:DiscountCarStereo.
Introduction: Just because you drive an older car does not mean you have to settle for old technology. IPods, Smartphones, iPods etc. let you enjoy music at the beach, at a picnic, in the back yard and in your car. The USB-BKR works on all Becker Radios that has an AUX setting in the user menu and connecting the adapter requires sacrificing the CD Changer.
A. Flush Mounting the USB Terminal to the Dash 1. Drill a ¾” hole in the dash using a step drill bit or equivalent (See Fig. 3) Fig. 5 USB Male (left) USB Female (Right) 3. Push the USB flat terminal ( See Fig. 6) through the hole until it snaps in place and flush with mounting surface (See Fig. 7) Fig. 3 Step drill bit 2. Insert the male end of the short USB extension cable (See Fig. 4) through the ¾” hole in dash and mate with the USB Female terminal on the Adapter (See Fig. 5) Fig.
. Tuck and secure extra wire from moving parts and test operation (See Enabling the AUX section below) B. Installing Optional Mounting Bracket without drilling Fig. 10 1. Locate a flat surface in the location of choice that is within 6 ft. of radio to mount the optional bracket to surface using adhesive/tape or screws. (See Fig. 8) 3. Push the flat USB terminal through the hole in the mounting bracket until it snaps in place and flush (See Fig 11) Fig. 8 Optional mounting bracket 2.
Operation: One of the most important steps in this process is enabling the AUX function within the radio menu. Most Becker radios are preprogrammed to recognize a CD Changer connection and because of that you must perform the following steps and change the setting to “AUX” otherwise the radio will not recognize the adapter. Enabling the AUX function 5. Turn Radio back “ON” Press “CD” button to enter AUX Mode. This is the mode to use whenever you want to listen to the device connected to the adapter.
Radios with 3 Function buttons (i.e. Mexico Pro cc BE4527) 1. Turn radio ON. 2. Press and hold Function button #2 (center) for more than 4 seconds. 3. The accompanying menu appears on the display. 4. Press the multifunction button located directly under “AUX” on the display to change the present setting from OFF to ON. 5. The Setting is stored automatically. Press “CD” button to enter AUX Mode Nav Traffic Radios 1. Press the "Radio" button to enter Radio mode. 2.
Becker DTM /High speed (i.e. BE-7892, BE7910) 1. Press the Sound button for more than 2 seconds 2. Press multifunction button “AUX” 3. Select Aux Mode on 4. The setting is stored automatically Disclaimer • This product has no affiliation with Porsche, Becker or Apple • There are no warranties expressed or implied by purchase of this product • We’re not liable for misuse of this product. •We recommend professional installation.