Installation guide

Introduction:
Just because you drive an older car does not mean you have to
settle for old technology. IPods, Smartphones, iPods etc. let you
enjoy music at the beach, at a picnic, in the back yard and in your
car. The USB-BKR works on all Becker Radios that has an AUX
setting in the user menu and connecting the adapter requires
sacrificing the CD Changer. From a single USB terminal on or near
the dash, the user can connect, play and charge all Apple devices
and the Galaxy S4 without sacrificing the look and feel of the
dashboard components. With the storage capacity of most
portable devices sacrificing the CD Changer should be an easy
decision.
Installation:
Warning! Although not critical, we recommend disconnecting the car
battery. But before anything locate and record the radio safe code. The
radio code, otherwise the radio will not operate upon reconnection.
1. Remove radio from the dashboard to gain access to the
connectors.
2. A pair of special removal tools (See Fig. 2) is required to
remove these radios.
3. To remove the radio, slide both tools into the slots to the
second detent position. Withdraw the radio by pulling
outwards.
4. With radio removed disconnect the blue (C-3) and green
(C-2) plugs from Radio connector (See Fig. 1 )
Warning! The blue and green iso plugs are present only if there is a CD
Changer or another accessory connected to the radio. Disconnecting
these plugs will permanently disable that accessory.
Fig. 1
Comand Radio Connectors
Fig. 2
Radio removal Tools
5. Connect the blue and green iso plug on the adapter to the
C-3 and C-2 slots vacated in step 4
6. Decide where and how to mount the USB terminal.
A. Flush mount requires drilling a ¾” hole in the dash
B. USB mounting bracket without drilling (use this
option to mount the USB terminal wherever your
installation demands)