Operation Manual

36
Navigation mode
Changing SPEEDLIMITS:
! Select SPEEDLIMITS: from the set-
tings and press the right rotary
control .
! By turning the right rotary control ,
select either
ON or OFF.
! The selection is accepted by pressing
and holding the right rotary control .
The list of settings is displayed again.
Requesting current time
! During navigation, press the left rota-
ry control .
! Press the multifunction button.
Current time and current date are dis-
played.
After 8 seconds, the system returns to
the navigation display.
Calling up current position
During route guidance, the current posi-
tion can be requested.
! Press the multifunction button.
The current position with road name (if
available), degrees longitude and lati-
tude, altitude above sea level and the
number of satellites received are dis-
played.
! Pressing the right rotary control re-
turns you to the route guidance dis-
play.
Note:
Further information on setting options
can be found under “Switching the
speed limits display on/off” on page 46.