Operation Manual

43
Navigation mode
Setting time
In order to achieve correct navigation on
routes with time-dependent traffic guid-
ance, and to calculate the estimated time
of arrival, it is necessary to set the GMT
time transmitted from satellites to the
current time zone.
! In the System Settings menu, select
TIME and confirm.
! With multifunction button or
, the time can be changed from
24- to 12-hour display.
! With the multifunction buttons
or , the time will be changed in
half-hour increments.
! By pressing the right rotary control
or multifunction button , the set
time is accepted.
The program returns to the System Set-
tings menu.
Saving position
! Set and confirm SAVE POSITION in
the System Settings menu.
The display will show the co-ordinates
(latitude/ longitude) for the current posi-
tion.
! Confirm by pressing the right rotary
control .
! Entering a Name for Position.
! Press the right rotary control for
more than 2 seconds to confirm the
name entered.
or
! Highlight the small tick and briefly
press the right rotary control .