Operation Manual

56
Radio mode
Selecting automatic tracking
In all modes and wavebands, automatic
tracking can be turned on by pressing
and holding the button for more
than 2 seconds.
In the TP menu:
! Press multifunction button re-
peatedly until
TP on appears.
Selecting / cancelling direct
programming
! Switching on TP menu.
Selecting:
! Press the multifunction button.
! Using the right rotary control , se-
lect the desired TP station and press to
confirm.
After a short delay and without actua-
tion, the selected station is accepted.
Cancelling:
! Press the multifunction button.
! Select Autoselect with the right
rotary control and press the control
to confirm.
After a short delay and without actua-
tion, direct programming is cancelled.
Switching mute on/off
Ensure that a TP or EON station is se-
lected.
Switching on:
! Press the button twice.
The mute function is then activated.
Only traffic announcements, navigation
announcements and telephone calls will
be switched through.
Switching off:
! Again, press .
or
! Turn the left rotary control .
The mute function is cancelled.
Attention:
If a TP station has already been pro-
grammed directly, it will once again be
selected as the TP station.