OPERATING GUIDE
Contents >>> CONTENTS Warranty 24-month warranty Safety instructions The Navigation device Operating manual contents Use Navigation Images Headset Unpacking the Navigation device Checking the contents Overview of functions Standard delivery Device and accessories Handlebar holder (optional) Complaints Handling the packaging Description of the device The basic unit Cable for power supply from cigarette lighter Motorcycle connecting cable Battery USB connection cable Unit bracket 6 6 7 10 10 10 10 10 11
CONTENTS Switching between upper and lower case: Deleting characters Inserting spaces The back button Content Manager Installing the Content Manager Starting the Content Manager Transferring pictures Faults Navigation Mode What is navigation? Selecting Navigation Home address Smart Guess Last destinations list The destination list Icons used Operating the last destinations list Start with existing destination Scrolling through stored destinations Displaying or editing a destination Personal destinations
>>> CONTENTS Using the map display Map zooming Moving the map Map orientation The Route overview Map display options Displaying the whole route Move route (model-dependent) Selecting alternative routes Canceling route guidance Entering/deleting a stopover Blocking route temporarily Setting day/night display Displaying current position (Where am I?) Entering the destination Skipping a destination Other additional functions (only selected models) Display height profile 4 78 78 78 78 79 80 81 81 82 83 83
CONTENTS >>> The information and data contained in these documents are subject to change without prior notice. No part of these documents may be duplicated or transmitted for any purpose whatsoever without express written permission of United Navigation GmbH. All technical information, drawings etc. are subject to copyright law. © Copyright 2015, United Navigation GmbH All rights reserved. The Bluetooth® word mark is a registered trademark owned by Bluetooth SIG, Inc.
Warranty >>> WARRANTY 24-month warranty The company United Navigation GmbH, Marco-Polo-Str. 1, 73760 Ostfildern, Germany, provides a world-wide, 24-month warranty (battery: 6 months) for BECKER units, beginning on the day of delivery to the final customer (buyer).
SAFETY INSTRUCTIONS >>> Safety instructions ¤ Safety instructions • Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents no risk, distraction or inconvenience to you, your passengers or other road users. Traffic laws and regulations will apply in each and every case. Destinations may only be entered when the vehicle is stationary. • The navigation system is merely an aid, data/information may in select cases be incorrect.
>>> SAFETY NOTICES • It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode. • Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such modification leads to the loss of the operating permission. • Only use original BECKER accessories.
SAFETY NOTICES >>> reason, United Navigation GmbH strongly recommends to have the device installed by a technician who has experience with electrical equipment. • The user must check whether the device is suitable for the intended use and connection. • The user shall bear all risks associated with the use of the device and the installation.
>>> THE NAVIGATION DEVICE Operating manual contents Use Navigation This operating manual contains the description of your Becker navigation equipment. This manual contains descriptions for different model versions in a single document. Therefore, some of the functions described here might not be available for your equipment under certain circumstances. All pictures are similar. This navigation device provides you with a powerful PND (Personal Navigation Device) for use in and on vehicles.
THE NAVIGATION DEVICE Headset Your Navigation device is equipped with Bluetooth® wireless technology. You can connect a headset or telephone equipped with Bluetooth® wireless technology via Bluetooth®. >>> Unpacking the Navigation device Note: Your Navigation device is delivered in a stable packaging. If the packaging or its contents show the signs of serious damages, you must not continue to unpack the product. In such case, please contact your dealer.
THE NAVIGATION DEVICE Speed camera detector Driver warnings Headset Trip computer Display height profile Move route ADAC Camping Guide Lane assistant Pro 3D 12 Navigation system mamba.4 LMU plus BE P10 Overview of functions : standard - : not available : optional mamba.
THE NAVIGATION DEVICE Standard delivery Complaints Handlebar holder (optional) 2 1 Device and accessories 3 4 7 1 2 Keep the original packaging in a dry place, at least for the warranty period. 5 3 4 In case of complaints, please consult your dealer. The equipment may be sent directly to United Navigation in its original packaging.
>>> THE NAVIGATION DEVICE Description of the device The navigation device consists of the basic unit and the accessories included in the scope of delivery. For descriptions of the individual parts, see: • "Standard delivery" on page 13 Note: The basic unit and accessories must not be opened or modified in any way.
THE NAVIGATION DEVICE the vehicle using the unit bracket. Information about the documentation Quick Start Guide The Quick Start Guide is designed to provide a brief introduction to operating your Navigation device. The most important basic functions of the Navigation device are explained in the Quick Start Guide. Operating instructions A comprehensive explanation of the Navigation device functionalities is contained in these operating instructions.
Overview of navigation device >>> OVERVIEW OF NAVIGATION DEVICE Operating controls Accessories Device holder Device 1 1 2 2 3 4 5 6 Main menu switch 4.
OVERVIEW OF NAVIGATION DEVICE >>> 1 2 3 5 4 Front of the device with control and display elements 1 Main menu switch: Without Route = Main menu / With Route = Delete stopover 2 Touchscreen with selected main menu 3 Touchscreen button Press = Activation of the corresponding button command 4 ON/OFF switch 5 Back button in the lower left-hand corner of the screen = In most applications Back function Long press = Call the main menu Overview of navigation device 17
>>> INSTALLING NAVIGATION DEVICE Installing navigation device Installing navigation device Installing handlebar holder (optional) ¤ Warning! Faulty cabling or bare wires! Improper electrical installation creates the danger of short circuit or damage to the vehicle and battery. > Only allow trained personnel to install the device.
INSTALLING NAVIGATION DEVICE Method 2 – Fastening on the brake or clutch lever >>> Mounting the device holder and connecting piece Notice: The standard delivery includes screws with 1/4 inch thread and M6 thread. Use the screws whose thread size match the existing screws on the brake lever or clutch lever. > Push the bracket screw over the handlebar. > Put the square shaft with spherical head onto the ends of the bracket screw. > Insert the adapter between the bracket screw and handlebar.
>>> INSTALLING NAVIGATION DEVICE > Tighten the handle to secure the device holder. Connection diagram 1 2 > Place the spherical head on the device holder onto the connecting piece. > Tighten the handle only slightly. > Align the device holder to the optimum viewing angle and ease of operation. Adjust the device holder in such a way that driving safety is not impaired.
INSTALLING NAVIGATION DEVICE Notice: Attach the device holder in such a way that it does not impair your vision with the mounted Navigationsgerät and is not within the sphere of action of the airbag. Make sure that the electrical connecting cable does not obstruct access to the operating controls of the vehicle. Clean the mounting surface on the windshield so that it is clean and free of grease. Do not use any lubricating, soapy cleaning agents.
>>> INSTALLING NAVIGATION DEVICE > Make sure that the device is securely placed in the holder. Inserting and removing the battery Make sure that the battery is inserted before operating the device. > Insert the battery or remove it. When the battery is inserted, the printing on the battery must be visible. > Close the flap. > Tighten the screw. Removing device from the device holder > Open the cover of the battery compartment. > Loosen the screw. > Open the flap. > Remove the device. > Close the cover.
>>> Charging the battery Inserting an SD card (optional) The battery is charged by the DC-DC adapter or vehicle charge cable during operation. The battery can also be charged using a mini USB power supply with at least 5 V/1.2 A. The charging temperature is between 0 °C und 45 °C. > Open the cover of the battery compartment. > Connect the USB adapter to an electrical outlet. > Open the cover of the battery compartment. > Remove the battery. > Open the cover of the SD card slot.
>>> GENERAL OPERATION Maintenance and care General operation The unit is maintenance-free. For proper care, a commercially available cleansing fluid for electrical devices may be applied using a soft damp cloth. ¤ Danger! Danger to life by electrocution. Always switch off the unit and disconnect the mains power supply unit before cleaning the unit, supplied components, or accessories. Note: Do not use any aggressive or abrasive substances or cloths which may damage the surface.
GENERAL OPERATION Battery quality declaration Display quality declaration The capacity of the rechargeable battery in your mobile navigation system decreases with every charging/ discharging cycle. Improper storage at excessively high or low temperatures may also cause a gradual deterioration of capacity. Consequently, the operating time may be substantially reduced even in the case of a fully charged battery.
>>> GENERAL OPERATION Using the battery The internal power supply is via the integrated rechargeable battery. The rechargeable battery is maintenancefree and does not require any particular care. You are alerted by a warning message when the battery should be recharged. After the alert, the device can still be used for approximately 10 minutes before switching off automatically. Note: Note that if the battery is completely discharged, it may take up to a minute before the device can be switched on again.
GENERAL OPERATION GPS antenna Navigation device Switch on/off (depending on model) Unit antenna The GPS antenna is integrated into the housing. Note: The integrated GPS antenna is not suitable for use in vehicles with antiglare windows (metalised thermoglass or metal foil, indicated by the window label - SIGLA SOL, SIGLA CHROM, SIGLA, KOOL-OF, SUNGATE, etc.) and vehicles with fine-meshed heating wires in the windows.
>>> GENERAL OPERATION > Press the button for the required language. > The selection is confirmed by pressing OK. If you agree to the request contained in this prompt, press the OK button. > Then select the desired voice. Note: for models with TTS Voices with a (TTS) tag support the textto-speech function (e.g. announcing roads and reading out text messages). A short example announcement is given. > Confirm your selection by pressing the OK button.
GENERAL OPERATION Basic information about the touch screen The Navigation device is fitted with a touch screen. Note: To ensure that the display's surface is not damaged, you may only touch it with your fingers or a blunt, non-smearing object. Operation When you touch a button on the touch screen, the button in question is briefly shown outlined in red to confirm the selection. If you touch a button that is not active at the moment, a short signal tone sounds.
>>> GENERAL OPERATION You can tell whether a telephone is already connected by the symbol on the Phone button. 2 1 1 2 Telephone connected Telephone not connected A satellite symbol at the right of the status line shows you whether there is currently GPS reception or not. 1 1 2 30 If route guidance is already active, the current destination address and a button for cancelling route guidance will be displayed between the two rows of buttons.
GENERAL OPERATION Entering characters Characters are entered by pressing the keys in the central area. Once the entry is complete, the process is concluded by pressing the key and the entry passed on to the Navigation device for processing. When a navigation destination is entered, the Navigation device compares the data with the stored data. Only those letters that are still possible area vailable for selection. Characters that cannot be selected are displayed greyed out.
>>> GENERAL OPERATION The selection list appears. Press the arrow keys on the right hand side of the screen to scroll through the list. > Press the destination you want. The destination is adopted and the selection list is closed. Special characters and accent marks Special characters and accent marks do not have to be used when entering the names of towns and streets. The Navigation device will change entries from AE, OE and UE if necessary.
GENERAL OPERATION Entering numbers Switch to the numbers keyboard in order to enter figures. > Press the button. The numbers keyboard is displayed. In order to return again to the keyboard for entering letters, press the button marked with an arrow. Switching between upper and lower case: During free text entry, it is possible to switch between upper/lower case and the automatic function.
>>> GENERAL OPERATION The back button The button is located on the bottom left of the device. It has various functions: • Depending on the menu context, if pressed briefly, you will be returned to the previous entry level. • The main menu is displayed by pressing and holding the button. Content Manager The Content Manager is a PC-based application containing a number of important functions to help you manage the content on your Navigation device.
GENERAL OPERATION > Click on Install to start the copying procedure. Click on Details to see the details during copying. The Content Manager is automatically started immediately after installation. Remove the check mark from the box if you do not want this. This completes the installation procedure. > Click on Finish to exit the installation program.
>>> GENERAL OPERATION • Click on No to start the Content Manager with the version already installed. • If the new version is a critical update, the Exit button will be shown instead of the No button. You must install the new version, otherwise you have to exit the application. If you have not yet made a backup of the navigation unit, the Content Manager will ask you each time it starts whether you would like to make a complete or partial backup copy. Note: We recommend that you always create the backup.
NAVIGATION MODE What is navigation? Navigation Mode The term "navigation" (lat. navigare = to travel by sea) is generally understood to mean the determination of a vehicle’s location, the determination of its direction and its distance from the desired destination and the required route to get there. Stars, prominent landmarks, compasses and satellites etc. are used as navigation tools. With the Navigationsgerät, the location is determined by the GPS receiver.
>>> NAVIGATION MODE Selecting Navigation Note: The menu items Set current position and Select from last destinations (fast access mode) can also be used to select a destination. Navigation mode is called up from the main menu. New destinations can be entered in the menu "New destination". Destinations that have already been visited or saved can be selected in the menu My destinations. > In the main menu, press the button My destinations.
NAVIGATION MODE Last destinations list The last destinations visited and saved destinations are displayed in the Last destinations list and can be selected directly. The menu for entering destinations can also be called up using the fast access function. Here you can set the new home address for example using an intelligent text entry field. Smart Guess The two addresses that can be selected with the button, is a selection of the addresses last visited.
>>> NAVIGATION MODE Icons used The following icons are used in the destination list: Icon 40 Meaning This destination is a standard destination with no special features. This destination is protected. If the destination memory is full, this destination will not automatically be deleted. This can be performed manually, if required. In the case of a protected entry, you can also determine the position using the fast access function.
NAVIGATION MODE Option Remove protection Move up Move down Delete entry Delete all entries Meaning The protection is removed from the destination. This function is only available for protected destinations. The destination is moved forwards by one position. If the destination is moved it is automatically protected. The destination is moved back by one position. If the destination is moved it is automatically protected. The destination is deleted from the fast access mode.
>>> NAVIGATION MODE A list of the available destinations will be displayed. Using the buttons or the scroll wheel, it is possible to scroll through the list. Note: If the list contains numerous entries, it may be a good idea to search for the desired destination by selecting Search entry and using the input menu. A maximum of 1000 destinations can be imported. Newly imported destinations are filed at the start of the list. > Select the desired destination.
NAVIGATION MODE more than 10 contacts. If there are fewer than 10 entries, a list of contacts is displayed straight away. > In the input menu, select the first letters of the entry you are looking for. > Press the button when the name you want is displayed in the top line. If there are 5 or fewer entries available with the letter combination entered, a list containing these entries will automatically be displayed.
>>> NAVIGATION MODE > In the main menu, press the button My Tracks. > A list with the existing tracks is displayed. This list includes the tracks you have recorded as well as the imported GPX tracks. > Select a track from the list. You can then either calculate a route to the start point of the track or to the nearest point of the track. Afterwards, you will first be guided to the start point that was selected by you. Once you have reached the track, it will be displayed for you by a flag on the map.
NAVIGATION MODE The New destination menu Layout of the New destination menu Enter address The various steps from selecting an address to starting route guidance can be carried out using the Enter address button. • See “Entering the address” on page 46. > In the main menu, press the button New destination. The menu for new destinations appears.
>>> NAVIGATION MODE Entering the address The Enter address button in the destination input menu opens the menu for entering addresses. > In the destination input menu, press the Enter address button. The menu for entering addresses appears. Note: By pressing the Clear form button (top right) you can delete all entered data apart from the country. 46 Selecting a country You can select a country from those available using the button for the country of destination.
NAVIGATION MODE Selecting an address and starting route guidance You can enter the exact destination address in the address input menu. The following settings can be made in the address input menu: • Town • Zip code (or postal code) • Street and house number • Junctions as an orientation aid It is also possible to: • search for a point of interest near to the address entered (POI search). This can be entered as described under „Point of interest near to an address“ on page 53.
>>> NAVIGATION MODE Note: If two words need to be entered you must separate them with the character . When sufficient letters have been entered it will automatically switch to a list from which you can select the town. However, you can switch to the list before this by pressing the button. Note: If you have entered a postcode, the name of the town will be hidden in the input menu to start with. If you then enter the street name, the name of the town will then also be displayed.
NAVIGATION MODE Using the street list Once a few letters of the desired street have been entered you can display a list of all the streets with the relevant letter combinations or this list will be displayed automatically. > Press the button on the right of the screen to call up the street list. > You can scroll through the displayed list using the buttons. > Press the button for the desired street.
>>> NAVIGATION MODE Displaying the route Once the address has been entered, the address input menu allows the route to the destination to be displayed on the map. > Press the Show route button to display the route on the map. The route is calculated. Storing a destination In the address input menu, the Save button opens a menu where a name can be entered for the specified destination.
NAVIGATION MODE If the route guidance is already running and a waypoint has already been entered you will be asked whether the new destination should replace the old destination or the waypoint. >>> Note: If there is no GPS signal when the route is calculated, the following will be displayed: > Select Replace stopover or Replace old destination. When a GPS signal is available, the route calculation will start automatically.
>>> NAVIGATION MODE Note: You can only select points of interest in the area in question if the GPS reception is adequate for determining a position. Otherwise, the last position stored will be used. You can extend the places of interest stored on the device by installing additional POIs in KML format on your device via the Content Manager. > In the main menu, press the button New destination. > > Press the Select Point of Interest button.
NAVIGATION MODE > The name, distance as the crow flies and the address is displayed for each entry. > Select the desired point of interest. You will now receive additional information about your chosen destination. > Press the Start button to begin route guidance to the point of interest directly.
>>> NAVIGATION MODE By pressing of the button next to the selected POI, you can display the additionally available information for the destination. Entering a point of interest directly > Press the POI search by name button. > Point of interest near to destination > Press the POI near destination button. > Press the Start button to begin route guidance to the point of interest directly.
NAVIGATION MODE > Press the Start to begin route guidance to the point of interest straight away. However, you can also display your chosen point of interest on the map (On map), store it in fast access mode (Save) or display the route to the point of interest (Show route). Additional point of interest information Any additional information that is provided for a point of interest can also be displayed.
>>> NAVIGATION MODE Selecting a destination from the map You may also select a destination directly from the displayed map. > Press the Select on map button. The map display appears. Note: You may need to make the area larger using the zoom buttons and in order to find the desired point. You can also move the map to the desired point. > Press the desired point lightly on the surface of the screen. A flashing red cross will be displayed at this point.
NAVIGATION MODE Coordinate entry You can also enter your destination using geographic coordinates. > In the main menu, press the button New destination. > Press Enter geo-coordinates. 1 2 3 > Using 2 select the value you wish to change. > Using the two buttons indicated by 1 select the direction required for the geographic longitude and latitude (east/west or north/south). > Then enter the desired values using the buttons to . The entry field at the beginning may be displayed greyed out.
>>> NAVIGATION MODE By pressing Add stage you can now add a stage to the route. After pressing Rename route you can give the route a new name. Pressing Delete route will allow you to delete the route from the stored routes. Note: If no routes have yet been stored, the route menu is empty. Selecting and starting a route > Press a route to select it. The route is loaded and displayed in the stage menu. Note: If a start point is selected, this is only used to view a route.
NAVIGATION MODE Simulation of the route There is a play button on the left under the map, used to start a simulation of the route. If you touch the display after starting, a control bar is displayed at the top with control buttons for the simulation. You can pause the simulation with the button, and continue it with the button. The button allows you to fast forward the simulation by a 16x speed. You can move from route section to route section with the and buttons.
>>> NAVIGATION MODE Editing a route > Select the route you wish to edit. > Press the button in front of the stage you wish to edit. Option Replace stage Meaning You can replace the selected stage with another intermediate destination. Optimising a route If you have entered several destinations for a route, you can use the Navigationsgerät to optimise the order of the destinations for the journey distance. The route stored is retained even after optimization, however.
NAVIGATION MODE Navigation settings The navigation settings contain all the settings that are relevant to the navigation functions. Note: All your settings must be confirmed by pressing the button. Only in a few cases it is possible to confirm selections in the menu using the OK button or the Yes button. > In the main menu, press the ton. This will take you to the navigation settings menu.
>>> NAVIGATION MODE > Press the 2 button for the arrow display. >To call up the extended settings, press the Advanced button. 62 The following setting options are available in the extended settings: • Auto zoom You can select how the map changes when approaching an action point or at different speed. • Select POI categories You can select which symbols are displayed for points of interest on the map.
NAVIGATION MODE Auto zoom > Press the Auto zoom button in the extended settings. > Pressing the Auto zoom button switches the zoom function on ( ) or off ( ). When the zoom function is switched on, you can select whether the autozoom action should be weak, medium or strong. >>> Select POI categories You can select which POI symbols are to be displayed on the map. > Press the Select POI categories button in the extended settings. > Selecting Show all POIs displays all points of interest on the map.
>>> NAVIGATION MODE Note: This setting is only available in the 3D view. Touch the first field to select one of the possible options. An options list appears on the right side over the window. After selecting a route (cell with route), the following display options are available: Distance, Remaining time, Arrival time, Speed, Speed limit, Time and Height. Under these options, you can select displays for the travel without a selected route.
NAVIGATION MODE The route overview button The Guidance info button > The options in this settings menu allow you to choose which points of interest can be displayed in the map view when pressing the route overview button. > Activate the option All Destinations. In the Guidance info settings window you can select which additional information you would like displayed during route guidance. > Press the Guidance info button in the settings menu.
>>> NAVIGATION MODE Setting Meaning Signposts When this function is activated, you receive additional important information at traffic junctions about the sign you should follow. Country info When this function is enabled, you will automatically receive generally applicable traffic information for the relevant country when you cross a national border (e.g. speed limits).
NAVIGATION MODE Selecting the vehicle profile (depending on model) This setting influences the calculation of the expected time of arrival and blocks e.g. motorways for the bicycle setting. The window for selecting the maximum speed is displayed. 1 2 3 4 > The different profiles are displayed and you can select the desired profile by pressing the appropriate button. 1 Car profile 2 Motorcycle profile 3 Bicycle profile 4 Pedestrian profile After selecting the desired profile, it is displayed.
>>> NAVIGATION MODE Winding Route With this option a route can be selected that is specially tailored to the needs of the motorcycle. The calculated routes can sometimes be considerably further and also last longer than with other route options! Three different settings are possible, which can vary considerably from each other depending on the route.
NAVIGATION MODE The Voice guidance button In the Voice guidance settings window you can make settings relating to the voice guidance of the Navigationsgerät. > Press the Voice guidance button in the settings menu. The Voice guidance settings window appears. • Volume You can select the standard volume for voice announcements for each start of the Navigationsgerät, or switch off voice announcements completely.
>>> NAVIGATION MODE Setting the Voice In the Voice settings window you can set the voice that will make the navigation announcements for the language that has been set. > In the Voice guidance settings window, press the Voice button. The Voice settings window appears. Setting the Volume With the Volume settings window, you can set the standard volume for voice announcements for each start of the Navigationsgerät, or switch off voice announcements completely.
NAVIGATION MODE • Driver alerts (depending on the model) You can have signs displayed, for example for dangerous curves or steep gradients, provided this information is stored in the map data. • Speed info You can select whether speed limits are displayed in parallel to the navigation. You can also receive an audible warning about exceeding the speed limit. • Speed camera warnings* You can receive a warning about permanent speed checks.
>>> NAVIGATION MODE Setting Speed info The Speed info settings window allows to select whether speed limits are displayed in parallel to the navigation. You can also receive an audible warning about exceeding the speed limit. Setting Note: This information can only be displayed if it is contained in the map material. Alert The following settings are available. ¤ Setting Risk of accident! The information in the map material may be incorrect as a result of shortterm changes (road works, for example).
NAVIGATION MODE The Format button The Time button The Reset button In the Format settings window you can set the measurement units to be used for times and distances. > In the settings menu, press the Format button. You can select the time zone relevant for your location in the Time settings window. This setting is important for the correct calculation of the estimated time of arrival. > Press Time in the settings menu. You can reset the navigation settings to their factory settings.
>>> NAVIGATION MODE The map display The map display is used primarily for route guidance. However, you can also use the map display without route guidance to show your current position and, for example, to receive warnings about exceeding the speed limit. Calling up the map display The map display is called up automatically when you start route guidance. Without route guidance, you can call up the map display from the main menu.
NAVIGATION MODE Note: If you follow the traffic lane recommendation, the next driving manoeuvre is possible without changing traffic lane. Current road or street that the next driving manoeuvre leads to 9 Distance to the next driving manoeuvre 10 Next driving manoeuvre 11 Info box 8 Your current position is displayed on the map via the position icon. The Information box During route guidance you can have information displayed in the Info box.
>>> NAVIGATION MODE Information is also displayed in the bottom left corner in the preview area. Guidance info with arrow display 7 The next manoeuvre is displayed as an arrow, with a distance indication underneath it. If two driving manoeuvres are to be performed in succession within a short time, another smaller arrow indicating the second driving manoeuvre is displayed above the first arrow.
NAVIGATION MODE Map display with Junction view You can display a detailed and realistic view of the lane situation at many motorway junctions. To do this, switch on the Junction view function as described under „The Guidance info button“ on page 65. If you are then directed through a motorway junction by the Navigationsgerät, you will see a corresponding display. Tunnel view When your enter a longer tunnel, a three dimensional tunnel view appears.
>>> NAVIGATION MODE Using the map display Map zooming The map can be zoomed into in steps by using the zoom buttons. > Press the button. The zoom buttons are displayed. to "zoom in on the > Press zoom in map" and therefore to get closer to the details displayed. > Press zoom out to "zoom out from the map” and therefore to obtain a larger overview. > Press the button to switch back to the set zoom step after a change.
NAVIGATION MODE You can orient the map for example in the direction of travel. The Route overview With the Route overview, you can have Points of Interest (POIs) and, if the TMC on route option is activated in the TMC events or POIs. A list of POIs and, if applicable, TMC events is displayed with the expected arrival time and distance from the current vehicle position. > Press the desired Point of Interest or TMC event.
>>> NAVIGATION MODE Note: If there is a traffic jam announcement on the route, the TMC symbol appears on the button. If there are no traffic jams reported on the route, the POI symbol is displayed instead. Map display options In the map display options, you can change the settings for route guidance, the map display and the route. On the map display, press the button on the bottom right. This opens the options menu for the map display.
NAVIGATION MODE Displaying the whole route Move route (model-dependent) New route (Only available when route guidance is active.) You can have the whole route to the destination displayed on the map. Additionally, you can have a complete route description displayed. As a further option, you can display and, if needed, select the different routes that can be set in the Route options. > Call up the options menu for the map display.
>>> NAVIGATION MODE description, it is displayed on the map. > The first point of the route description is displayed on the map. You can scroll through the whole route and Back description with the Next buttons. You can also display a list version of the route description. For this press the List view button. The simulation is continued button. by pressing the Resume Press the arrow keys on the right hand side of the screen to scroll through the list.
NAVIGATION MODE Canceling route guidance Entering/deleting a stopover (Only available when route guidance is active.) You can cancel the active route guidance. > Call up the options menu for the map display. (Only available when route guidance is active.) With this function, you can enter a stopover, or you can delete an entered stopover. > Call up the options menu for the map display. > Press the Stop guidance button. This cancels route guidance to all destinations. > Press the Add stopover button.
>>> NAVIGATION MODE Blocking route temporarily Using the Block road ahead option, you can block a stretch of road ahead temporarily. This determines a certain stretch of road that should not be used. The Navigationsgerät will now try to calculate a detour. Notes: • The selected length of the block is only an approximation since the actual distance blocked depends on the availability of an exit. > Call up the options menu for the map display. > Press the Block the road ahead button.
NAVIGATION MODE Displaying current position (Where am I?) You can display your current position, make an emergency call (depending on model), select a hospital or filling station and save this position. Furthermore, you can display information regarding the current GPS reception and the current country. > Call up the options menu for the map display. > Press the Where Am button. or . In addition, you have other telephone functions at your disposal. Also see chapter „Telephone Mode“ on page 88.
>>> Entering the destination (Only available when route guidance is not active.) You can enter a destination. > Call up the options menu for the map display. > Press the Enter destination button. NEU! > You can now enter a destination as described under „The New destination menu“ on page 45 (Home, Enter address, Select Point of Interest, Personal destinations, Contacts, Route planning, Select on map or Enter geo-coordinates).
OTHER ADDITIONAL FUNCTIONS (ONLY SELECTED MODELS) Display height profile You can display a height profile from the Show route or Alternative routes view. To do this, select the button. Other additional functions (only selected models) Height profile for a route: Height profile for alternative routes: >>> Yet more functions are available for aland ternative routes. Press the Next buttons to highlight the individual height profiles.
>>> HEADSET MODE Headset Mode You can connect a headset equipped with Bluetooth® wireless technology to your navigation device. The voice outputs and warning alerts are then not output via the integrated loudspeaker but via the connected headset. Headset Mode Below is a description of how to establish the connection. > In the Settings menu, press the Headset Settings button. > In the following menu you can switch Bluetooth® on and off, and select your headset from a list.
TOOLS Under Tools, the following functions are grouped together, depending on the model: • Start track recording • Marco Polo City Guides • Image viewer • Country information • Overview of functions • Change battery • Trip computer The Tools menu is called up from the main menu. Tools Extras > Select the desired function by pressing one of the buttons.
>>> EXTRAS > > Select Yes if you want to save the track. With the travel guide, you can select, for example, MARCO POLO Top-Highlights or MARCO POLO Insider Tips and start the guide destination there. See "Travel Guide (model dependent)" on page 55. Image viewer* A message is displayed stating that the image viewer must not be used when driving. Please observe this warning. You can either use the default name or delete the name with the button and then enter any other name.
EXTRAS The image viewer menu Selecting an image In the image viewer menu, you can select images, start a slide show and call up the settings. 3 4 2 5 2 2 2 Folder containing images Thumbnails of the images in the current folder 3 View the previous page of images/ folders 4 Go up one level in the directory hierarchy 5 View the next page of images/ folders 1 2 > In the image viewer menu, select the desired folder, and then the desired image.
>>> EXTRAS Enlarging the image > Show the image menu. > Press the Zoom button. Displaying image information > Show the image menu. > Press the EXIF button. > Move the control on the top of the screen to the desired level of magnification. The image can then be moved around. Press the centre of the image to cancel the enlargement. Information on the current image is displayed. > Press the button to close the information. Rotating the picture > Show the image menu.
EXTRAS > You can use Interval time to set the display duration. > In Effects you can choose the transition effects for the images. > In Load pictures in high quality (slower) you can choose whether images should be loaded at high resolution ( ) or not ( ). Loading the images at high resolution makes the display slower. > Confirm your settings by pressing the back button . Where am I? > See "Displaying current (Where am I?)" on page 85. for some time.
>>> EXTRAS Symbol Meaning Speed limit in built-up areas Speed limit outside built-up areas Speed limit on motorways > The country-specific information is displayed (maximum permitted speed, alcohol limits, etc.). Click on these symbols to display additional information. Note: Please note that the information may not be complete and other regulations may apply in the various countries. Press the to zero.
EXTRAS >>> Total distance Travel time without breaks in the journey 7 Travel time with breaks in the journey 5 6 Press the Reset button to reset the values to zero.
>>> SETTINGS Selecting system settings The system settings menu Settings You can change various basic settings for all applications on the Navigation device. > In the main menu, press the ton. but- You can select the various settings optionsfrom the system settings menu. Operation Selection options Select the desired menu item by pressing the appropriate button. The functionality of the buttons varies depending on the selection and is described under "The individual menu items" on page97.
SETTINGS The individual menu items Battery Your Navigation device may be operated using an external power supply unit or an integrated rechargeable battery. Note: The current charging state is important when operating with a battery. If the battery is low on power, it may not be possible to continue navigation right to the destination. The energy supply and status are shown on a display. The power level is shown in the charge display. In the example, the battery still has around two-thirds charge.
>>> SETTINGS • Bottom icon: The function is switched off, the Navigation device does not switch off automatically. The following display is shown during automatic switch-off. You can cancel the automatic switch-off procedure by pressing the Cancel button. Day/night display You can set the Navigation device display to day, night or automatic. The automatic setting changes automatically between day and night display depending on the time, the current position and the time of year.
SETTINGS Setting the colour You can change the colour of the icons and other design elements. Language The texts on the touch screen can be displayed in a variety of languages. > Press the Colour schemes button. Opening language selection You can choose between the various languages using the following button: > Press the Language button. The language selection appears. 1 2 > Select one of the eight predefined colours. or > Select the required colour using the slider 2 at the bottom of the display.
>>> SETTINGS Keyboard layout You can switch the sequence of the keyboard layout by selecting the corresponding key. Sounds You can switch the Navigation device signal tone on and off. This also includes the clicking of the touch screen buttons. > Press the Tones button. Depending on the previous setting, the signal tones are switched on or off.
SETTINGS >>> Calibration (model dependent) If the touch screen responds incorrectly when buttons are pressed, it needs to be calibrated. Starting the calibration You can start the calibration using the following button: > Press the Calibration button. The calibration procedure will be started. You will be guided through the procedure by means of text instructions.
>>> TECHNICAL TERMINOLOGY GMT (Greenwich Mean Time) Central European Time standard Standard time at 0 degree longitude (the longitude intersecting Greenwich, Great Britain). This time is used worldwide for synchronization of data collection. Technical terminology Bluetooth® wireless technology Technology for wireless data transmission at short range up to 10 metres. 102 GPS (Global Positioning System) GPS determines your actual geographical position by the use of satellites.
TECHNICAL TERMINOLOGY Stylus A stylus is an input pointer which is used for the operation of touch-screens, mobile phones or PDAs. The stylus consists basically of a plastic pointer with a softer plastic core. The sleeve is hard and can be gripped and the softer core emerges at the tip and is designed to touch the screen as softly as possible (i.e. without the danger of scratching the screen). The stylus is more accurate than operation using the fingers, since only the thin tip touches the screen.
index >>> INDEX Numerics 3D display . . . . . . . . . . . . . . . . . . . . . . . . 61 A Adjusting the map view . . . . . . . . . . . . 61 Announce streets . . . . . . . . . . . . . . . . . 69 B Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Blocking a section of the road . . . . . . 84 Bluetooth® wireless technology . . . 102 C Content Manager . . . . . . . . . . . . . . . . . . 34 telepítése . . . . . . . . . . . . . . . . . . . . 34 Coordinate entry . . . . . . . . . . . . . . . .
INDEX N S U Navigation . . . . . . . . . . . . . . . . . . . . . . . . 37 starting . . . . . . . . . . . . . . . . . . . . . . . 50 terminating . . . . . . . . . . . . . . . 30, 83 Safety instructions . . . . . . . . . . . . . . 7, 37 Satellites . . . . . . . . . . . . . . . . . . . . . . . . . .85 Selecting a country . . . . . . . . . . . . . . . . .46 Selecting a town . . . . . . . . . . . . . . . . . . .47 Selecting destination Entering an address . . . . . . . . . . .47 Selecting the street . . . .
>>> MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications Weight Processor in MHz Flash memory SD-RAM Li-ion battery Holder for windshield Holder for vehicle integration Dimensions in mm (W x H x D): Screen size Display resolution Resistive touch display Micro SD card reader USB interface 1 Internal loudspeaker Voltage source 106 mamba.4 LMU plus BE P10 Navigation system mamba.
NOTICE >>> Dear customer, In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonized national regulations. This designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility.
>>> NOTICE Disposal of the unit Customer information on the disposal of electrical and electronic devices (private households) According to the self-proclaimed corporate principles of United Navigation GmbH, your product has been developed and manufactured from high-quality, recyclable materials and components. This symbol on the product and/or accompanying documentation means that electrical and electronic products must be disposed of separately from the houshold garbage at the end of its service life.
NOTICE >>> Disposal of the battery Duty to supply information according to battery legislation (BattV) Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteries via specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.
3LGRCBÍ,?TGE?RGMLÍ%K@& &:J<ͱ )ͱEͱ ,LJ Á ͭ Á(KL˓E=>JG - Germany UUU KW@CAICP AMK
