User manual

63
NAVIGATION MODE >>>
Auto zoom
> Press the
Auto zoom button in the ex-
tended settings.
> Pressing the
Auto zoom button
switches the zoom function on ( ) or
off ( ).
When the zoom function is switched on,
you can select whether the autozoom
action should be weak, medium or
strong.
Select POI categories
You can select which POI symbols are to
be displayed on the map.
> Press the
Select POI categories button
in the extended settings.
> Selecting
Show all POIs displays all
points of interest on the map.
Selecting
Show no POIs displays no
points of interest on the map.
Selecting
User defined selection and
then pressing the
Select POIs button al-
lows you to determine for yourself in the
menu which then appears whether each
individual points of interest category is
displayed or not.
You can then switch the display of entire
categories on ( ) or off ( ).
After pressing the button beside a
category you can switch subcategories in
further menus on or off.
> Confirm all your settings by pressing
the button.
Selecting Info box data fields
In this menu you can define the data to be
displayed in the Info box in the top left
corner of the map view.
> Press the Info box data fields button.
The Info box data field selection window
appears.