User manual

70
>>> NAVIGATION MODE
Setting the Voice
In the
Voice settings window you can set
the voice that will make the navigation
announcements for the language that
has been set.
> In the
Voice guidance settings
window, press the
Voice button.
The
Voice settings window appears.
> Select the desired voice.
A short example announcement is given.
> Confirm your selection by pressing
the button.
Setting the Volume
With the
Volume settings window, you
can set the standard volume for voice
announcements for each start of the
Navigationsgerät, or switch off voice
announcements completely. Depending
on the situation, this setting can be fitted
into the map display.
> In the
Voice guidance settings
window, press the
Volume button.
The
Volume settings window appears.
Select the desired volume with
the and buttons or the
scroll wheel.
> The voice output can be switched off
completely or turned back on by
pressing the Mute button.
> Confirm your settings by pressing
the button.
The Warnings button
In the Warnings settings window you can
select which warnings are to be
displayed by the Navigationsgerät or
which warning sounds are to be output.
> In the settings menu, press the
Warnings button.
The
Warnings settings window appears.
The following setting options are then
available:
Note:
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).