Operation Manual
54
5DGLR2SHUDWLRQ
$QRXQFHPHQWVWDQGE\VZLWFKRQRII
If the selected traffic programme transmitter should interrupt the AM, LW or
tape/CD operation for traffic announcements, the button must be pressed
until the abbreviation 73 is displayed.
If traffic announcements are not desired, the button must be pressed until
the abbreviation 7 appears.
If no traffic programme transmitter is selected, the automatic transmitter search
is activated by pressing the button and a traffic programme transmitter is
selected.
1RWH During the traffic announcement, the desired increase in volume
can be set via the volume button. An announcement which is
currently being heard can be terminated by pressing the button.
The unit then switches back immediately to the previously selected
operating mode in the mute condition. However, the next traffic
announcement is switched through again.
0XWHIXQFWLRQVZLWFKRQRII
After selection of a TP or EON transmitter, the mute function can be activated
by pressing the button briefly. The prompt 73,1)2 appears. Thereafter,
only traffic announcements are switched through. The mute function is
cancelled by pressing the button again or by turning the volume control.
If no TP or EON transmitter is selected, 087( is displayed on actuating the
button. For 087(, no traffic announcements are switched through.