Operation Manual

71
5HPRYDO,QVWDOODWLRQ*XLGH
For removal, the unit must first be unlocked. For this purpose, push in both slides to the second detent position, as shown in
illustration A. Subsequently, withdraw the unit with both slides (illustration C). Then remove the slides by pressing the springs
on the right and left sides of the unit.
If the unit has been installed in another vehicle, the unit’s springs may have to be adjusted before installation. To adjust the springs,
push in the slides as shown in illustration D and then adjust as shown in illustration E (press the slide lightly in direction 1 and
simultaneously move the slide in direction 2).
&
'
(

