Operation Manual
46
*HQHUDO2SHUDWLRQ
/RXGQHVVRQRII
Press button and then multifunction button “/'”. /28'21 or /28'
2)) are displayed. The loudness can be switched on or off alternately by pres-
sing the multifunction button.
/LQHDUDGMXVWPHQW
Press and hold button for more than 2 seconds. The tone values for the set
signal source (e.g. radio/FM) are set to an average value )0/,1($5.
Press and hold button for more than 4 seconds. All tone values for the
signal sources radio and tape / CD are set to an average value $///,1($5.
$GMXVWPRQRVWHUHR
Three different reception optimisation settings can be set in order to suppress
reception dependent interference and reflections.
Repeatedly press multifunction button “67” in tone menu until the desired
optimisation is set.
$872Setting for normal operation - i.e., the unit switches from stereo to
mono and back depending upon reception location (provides the optimum set-
ting for almost all reception areas).
67(5(2 Setting for unusal reception situations - i.e. the unit is set perma-
nently to stereo (e.g. for private radio stations in city areas)
0212Setting for reception conditions in which reflections constantly occur
- i.e., the unit is set constantly to mono.
The setting is effective immediately after pressing the multifunction button
“67” and is also retained on switching off.