Operation Manual

CD changer operation

CD changer mode

Operational readiness of CD changer

If a CD changer is connected to the car radio, the CD changer

is ready for operation as soon as the filled CD magazine is

loaded. Close the sliding cover after loading. All further

operation is performed from the car radio control panel.

Loading / ejecting the CD magazine

To remove the CD magazine, open the sliding cover on the

changer and press the eject button. The magazine is ejected

and can be removed.

When inserting CDs into the magazine, please note the

instructions printed on the magazine.

Attention: Incorrectly inserted CDs will not be played.

Note: To allow for the fastest possible change of CDs,

the magazine should be loaded successively, be-

ginning with compartment 1.

Playing CDs

Press . If the unit was last set to CD changer operation

or there is no CD in the CD drive, the CD changer menu is

now active.

If CD operation was selected last, the unit must be switched

to CD changer operation by pressing the multifunction

button.

Playback begins with the last CD played, at the track playing

before switching off.

For additional operating instructions, refer to CD mode

(Page 64):

• ”Notes on compact discs (CD)” on page 64

• ”Forward / backward track skipping” on page 65

• ”Scan search” on page 65

• ”Fast forward / reverse” on page 66

• ”Random play” on page 66

• ”Track repeat” on page 66

• ”Track display” on page 66