Operation Manual

76
User menu
• Stereo: Setting for exceptional reception conditions - i.e.
the unit is constantly set to stereo.
•
Mono: Setting for reception conditions in which reflec-
tions constantly occur - i.e., the unit is constantly set to
mono.
The setting is effective immediately and is also retained after
power is turned off.
AUX input (Aux)
This can be used to switch on the CD changer AF connections
if no CD changer is connected. An external unit (Discman,
Walkman, etc.) can then be connected.
To set, call up user menu. Use the multifunction button
to select either
AUX Mode on (on) or Aux Mode off (off)
The setting is stored automatically.
The multifunction button must be pressed whilst in CD
mode to select AUX mode.
Signal tone volume (Bev)
The volume of signal tones (e.g. storage confirmation) can be
set using this function.
Press the multifunction button. Use the right-hand
rotary control to select between
0 (Quiet) or +5 (Loud).
The setting is stored automatically.