Operation Manual

50
General operation
Fader
Press the button and then the multifunction
button.
Use the right-hand rotary control to achieve the desired
fader setting.
Setting the balance
Press the button and then the multifunction
button.
Set the desired balance level using the right-hand rotary
control .
Linear adjustment
Briefly press the button.
Briefly press the multifunction button -
Tone flat is
displayed. Pressing the multifunction button again will
reset the tone adjustments for the current signal source
(e.g. FM) to mid-level.
Switching loudness on / off
Press the button and then the multifunction
button.
You can use the multifunction button to select either
Loudness on (
ON) or Loudness off (OFF).
For the MW, LW and SW wavebands, loudness is turned off.