Operation Manual

59
Radio mode
Switching TP on / off
In all modes and wavebands, TP can be turned on or off by
pressing and holding the button for more than 2 sec-
onds.
TP can also be switched on or off whilst in the TP menu.
Switching on: To turn on TP in the TP Menu, repeatedly
press the multifunction button until
TP on appears.
Switching off: To switch TP off whilst in the TP Menu, press
the multifunction button repeatedly until
TP off ap-
pears.
TP is switched off after returning to normal display.
Selecting automatic tracking
In all modes and wavebands, automatic tracking can be turned
on by pressing and holding the button for more than
2 seconds.
To switch on automatic tracking whilst in the TP Menu, press
the multifunction button repeatedly until
TP on ap-
pears.
Note: If a TP station has already been programmed
directly, it will once again be selected as the TP
station.
Selecting / cancelling direct programming
Activate the TP menu.
Selecting: Press the multifunction button.
Use the right-hand rotary control to select the desired TP
station. After a short delay and without actuation, the selected
transmitter is accepted.
Cancelling: Press the multifunction button.