Operation Manual

CD mode

Inserting / ejecting CDs

Insertion:

Insert the disc into the CD slot with the printed side facing up-

wards. The CD will be drawn into the unit automatically. In

the case of an audio CD, the unit will then begin to play the

first track and in the case of an MP3 CD, the first track in the

first directory.

After the last track of the CD has finished playing, the unit

will automatically repeat the CD from the first track.

If there is already a CD in the slot, press the button. If

CD changer / AUX mode was the last selection made, then the

multifunction button must be used to switch to CD

mode or the multifunction button used to switch to

MP3 mode.

Ejecting the CD:

To eject a CD, press the button, and the CD will be eject-

ed. Remove the CD.

Attention: When the unit is turned off, the CD will not

be ejected, but will remain in the CD slot.

Forward / backward track skipping

Audio CD tracks or tracks from the current MP3 CD directory

can be selected by turning the right-hand rotary control.

When you get to the last track, in the case of an audio CD the

unit continues to the first track or in the case of an MP3 CD,

to the first directory. In a similar manner, it switches from the

first track back to the final track.

If a track has been playing for more than 10 seconds when the

skip button is pressed, the unit will skip back to the beginning

of the selected track.

Scan search

Press right-hand rotary control , will appear in the dis-

play.

All following CD tracks are played for 12 seconds each. Press

the right-hand rotary control again to terminate the scan

search.