Operation Manual

67
CD mode
Display CD text
If the CD features CD text information, this can be displayed.
Press the left-hand rotary control whilst in CD mode.
If CD text information is available for the current track, it will
be displayed. If no CD text is available
No Info will be dis-
played.
If CD text information is already active when the next track is
played, the display will be updated automatically.
CD text will continue to be displayed until the unit is switched
off or the left-hand rotary control or the button is
pressed.
Temperature protection circuit
To protect the laser diode from excessive heat, a temperature
protection circuit is integrated into the unit.
On activation of the temperature protection circuit,
Temp will
appear for 8 seconds and the unit will be switched back to the
radio source.
After a cool down period, single CD mode or CD changer
mode can be called up again. If the temperature is still too
high, the unit will once again switch back to the previously se-
lected radio source.