Operation Manual

74
User menu
User menu
Calling up / exiting user menu
The user menu is called up by pressing the key.
After calling up the user menu, the following basic settings
can be made on two levels according to your personal prefer-
ences.
•
Gal - Speed dependent volume control (GAL)
•
Tel - Adjusting telephone function settings
•
M/S - Setting for reception optimisation
•
Aux - Setting for the AUX input
•
Bev - Adjustment of signal tone volume
Quitting:
To quit the user menu, press the button again. Al-
ternatively, the menu will be cancelled after a short delay if
no further operations are performed.
Setting the GAL (Gal)
The GAL is a car radio control circuit, which automatically
adjusts the car radio volume according to vehicle speed. This
results in compensation of the driving noise produced at high-
er speeds. If you wish to make use of this feature, a speed sig-
nal must be linked to the unit.
Call up the user menu. Press the multifunction button.
Use the right-hand rotary control , to choose a value be-
tween
0 and +15.
The GAL setting can be used to specify the starting point for
the volume adjustment according to vehicle speed.
The setting is stored automatically.
The settings are:
•
0 - No volume increase
•
+1 - Volume increase begins at low vehicle speed
•
+15 - Volume increase begins at higher vehicle speed