Operation Manual

75
User menu
Telephone mute function (Tel)
If a telephone with hands-free operation is installed, the call
may be routed through the speaker system. This eliminates
the need for an additional speaker. However, the signal leads
(AF – Telephone input and Earth – Telephone input) must be
connected to the car radio (see page 83).
To set, call up user menu. Press the multifunction but-
ton to choose between
Audio Sig. (audio signal) and Mute.
•
Mute - Telephone mute setting
•
Audio Sig. - Telephone conversation via car radio
LED setting
This function can be used to switch the LED function (flashes
when the unit is switched off) on and off.
Call up user menu. Press the multifunction button to
choose between
blinking (LED on) and off (LED off).
The setting is stored automatically.
Setting reception optimisation (M/S)
In order to suppress reception-related interference, three dif-
ferent parameters can be set for reception optimisation.
Call up user menu. Press the multifunction button to
select
Stereo, Mono or Auto.
•
Auto: Setting for normal operation - i.e. the unit switches
from stereo to mono reception and back, depending on the
reception conditions (for nearly all reception areas, this is
the optimal setting).