OPERATING GUIDE
Contents >>> CONTENTS Contents 24-month warranty Warranty Safety instructions The Navigation device Operating manual contents Use of the product Navigation 2 6 6 7 9 9 9 9 Images* Telephone (selected models) 9 10 Unpacking the Navigation device 10 11 13 13 13 Description of the device 13 The basic unit Cable for power supply from cigarette lighter Battery USB connection cable Unit bracket Accessories Mains power supply unit Cable for vehicle integration (for certain models only) Information about
CONTENTS Transferring pictures Faults Navigation Mode What is navigation? Selecting Navigation Home address Smart Guess Last destinations list The destination list Icons used Operating the last destinations list Start with existing destination Scrolling through stored destinations Displaying or editing a destination Personal destinations Contacts Selecting a destination from Personal destinations Editing Personal destinations Selecting a destination from Contacts The New destination menu Layout of the New
>>> CONTENTS Traffic announcements using TMC (depending on the model) Live Traffic - Traffic Announcements via Data Connection (model dependent) Displaying TMC messages on the map Using TMC Reading a message Taking announcements into consideration when calculating routes Automatic recalculation Manual recalculation The map display Calling up the map display Structure of the map display Map display without route guidance Map display with route guidance The Information box Split screen with route guidance R
CONTENTS Tools Travel Guide (model dependent) Rear View camera Displaying Rear view camera (depending on the model) Image viewer* The image viewer menu Selecting an image Enlarging the image Rotating the picture Displaying image information Slide show Settings Where am I? Traffic forecast (depending on model) Country information Blocking a section of the road permanently Trip computer (depending on model) Settings Selecting system settings The system settings menu Operation Selection options Closing the s
Warranty >>> WARRANTY 24-month warranty The company United Navigation GmbH, Marco-Polo-Str. 1, 73760 Ostfildern, Germany, provides a world-wide, 24-month warranty (battery: 6 months) for BECKER units, beginning on the day of delivery to the final customer (buyer).
SAFETY INSTRUCTIONS >>> Safety instructions ¤ Safety instructions • Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents no risk, distraction or inconvenience to you, your passengers or other road users. Traffic laws and regulations will apply in each and every case. Destinations may only be entered when the vehicle is stationary. • The navigation system is merely an aid, data/information may in select cases be incorrect.
>>> SAFETY INSTRUCTIONS • It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode. • Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such modification leads to the loss of the operating permission. • Only use original BECKER accessories.
THE NAVIGATION DEVICE The Navigation device Operating manual contents Use of the product Navigation This operating manual contains the description of your Becker navigation equipment. This manual contains descriptions for different model versions in a single document. Therefore, some of the functions described here might not be available for your equipment under certain circumstances. All pictures are similar. This product is a high performance PND (Personal Navigation Device) for use in vehicles.
>>> THE NAVIGATION DEVICE Telephone (selected models) Your Navigation device is equipped with Bluetooth® wireless technology. Via Bluetooth®, you may connect to a cell phone equipped with Bluetooth® wireless technology. Your Navigation device can then be used as a very comfortable hands-free unit. You also have the option to read out the address book or phonebook of the cell phone and to read any received short messages.
THE NAVIGATION DEVICE transit.5 LMU BE B02 active.5 LMU plus BE B10 active.6 CE LMU BE B30 active.6 LMU plus BE B40 professional.5 LMU BE B20 professional.6 LMU BE B50 transit.6 LMU BE B50 - - - - - - - - - - - - - - - - - - ready.5 BE B60 active.
THE NAVIGATION DEVICE 12 Transit 70 LMU Pro BE J11 Professional 70 LMU BE J12 TMC Becker Speech Dialogue System Becker OneShot speech control Speed camera warning Driver warnings Telephone Trip computer Environmental zones Truck & Camper Navigation Pro Display height profile Move route ADAC Camping Guide Traffic forecast Driver profiles Driver profile Pro Lane assistant Pro 3D Reversing camera Connection for vehicle integration WiFi Becker Link2Live Live Traffic Live POI Search Navigation system Transi
THE NAVIGATION DEVICE Complaints Scope of delivery In case of complaints, please consult your dealer. The equipment may be sent directly to United Navigation in its original packaging. 2 2 1 4 3 Navigation device Device console with carrier plate (depending on model) 3 USB cable 4 Motor vehicle adapter power supply 12/24 V for cigarette lighters with built-in TMC antenna (depending on model) In the case of devices with magnetic holders, the carrier plate 2 and car adapter cable 4 form one unit.
>>> THE NAVIGATION DEVICE The basic unit The basic unit consists of the complete electronic unit: • Integrated antenna • a TMC receiver for receiving traffic messages (depending on the model), • Touchscreen • an integrated loudspeaker • a microphone (dependingon the model). On the side of the unit, there are also various connections and ports.
THE NAVIGATION DEVICE The power supply must satisfy the following requirements: • Alternating current 100-240 volts 50-60 Hertz Information about the documentation Quick Start Guide Cable for vehicle integration (for certain models only) With a 4-pin 3.5mm jack cable you can integrate your Navigation device seamlessly into your vehicle. Details of the connection can be found under "Cable for vehicle integration (depending on model, optional)" on page 23.
>>> OVERVIEW OF THE SCOPE OF DELIVERY 4 3 3 1 2 Scope of delivery 1 Basic device – PND (Personal Navigation Device) 2 USB connection cable 3 Unit holder with carrier plate (the design depending on the model) 4 Cable for power supply via the vehicle cigarette lighter (12/24 Volt) with integrated TMC-antenna (depending on the model) In the case of devices with magnetic holders, the carrier plate 2 and car adapter cable 4 form one unit.
OVERVIEW OF THE NAVIGATION DEVICE >>> 2 3 4 1 4 Front of unit with controls and displays 1 Back button Model dependent: either on the left bottom side of the screen or in the left top corner of the housing.
>>> (model dependent) OVERVIEW OF THE NAVIGATION DEVICE Model dependent, the arrangement of the connections can differ on the bottom side of the device.
GENERAL OPERATION Maintenance and care General operation The unit is maintenance-free. For proper care, a commercially available cleansing fluid for electrical devices may be applied using a soft damp cloth. ¤ Danger! Danger to life by electrocution. Always switch off the unit and disconnect the mains power supply unit before cleaning the unit, supplied components, or accessories. Note: Do not use any aggressive or abrasive substances or cloths which may damage the surface.
>>> GENERAL OPERATION 20 Battery quality declaration Display quality declaration The capacity of the rechargeable battery in your mobile navigation system decreases with every charging/ discharging cycle. Improper storage at excessively high or low temperatures may also cause a gradual deterioration of capacity. Consequently, the operating time may be substantially reduced even in the case of a fully charged battery.
GENERAL OPERATION Using the battery The internal power supply is via the integrated rechargeable battery. The rechargeable battery is maintenancefree and does not require any particular care. You are alerted by a warning message when the battery should be recharged. After the alert, the device can still be used for approximately 10 minutes before switching off automatically. Note: Note that if the battery is completely discharged, it may take up to a minute before the device can be switched on again.
>>> GENERAL OPERATION Connection to the mains outlet ¤ Danger! Make sure that your hands are not wet and that the power supply unit is dry. Only connect the power supply unit to a permissible mains power supply. Connecting to power supply Connection to the public mains grid is achieved using the optionally available mains power supply unit.
GENERAL OPERATION Cable for vehicle integration (depending on model, optional) With a 4-pin 3.5mm jack cable you can integrate your Navigation device seamlessly into your vehicle. • connect your Navigation device to the phone mute function of your audio system. If the cable is connected correctly, your audio system will mute the car radio during navigation announcements. • connect your Navigation device to your audio system for output of the audio signal.
>>> GENERAL OPERATION Inserting the memory card > Remove the memory card from its packaging without touching or soiling the contact bar. > Hold the memory card so that the contact strip is facing towards the rear of the unit. > Guide the memory card into the card slot. > Exert a little pressure and slide the memory card into the card slot until it snaps in. Ejecting the memory card The card slot ejects the card so that you can pull it out with two fingers.
GENERAL OPERATION 2 7 1 3 2 7 1 3 6 4 6 1 2 3 4 6 7 4 Suction surface Base Lever Fastening screw Carrier plate Release button Similar to figure, on devices with magnetic holders no unlocking button is present 7 . >>> On the windscreen The unit holder can be attached directly to the windscreen using the suction mechanism. > Press the carrier plate onto the four retaining lugs of the unit holder. > Select a suitable spot to attach. > Loosen the fastening screw 4 slightly.
>>> GENERAL OPERATION Adjusting the unit holder’s position Devices with magnetic holders > Loosen the fastening screws 4 and 5 until the carrier plate 6 can be moved without using excessive force. > Move the carrier plate 6 to the required position and hold it in this position. > Tighten the fastening screws 4 and 5 sufficiently so that the Navigation device is held securely in place when the vehicle is in motion. The unlocking button 7 is not present.
GENERAL OPERATION Switching on > Press the button on the top of the Navigation device. The unit is switched on. The manufacturer's logo appears on the touchscreen. >>> > Press the button for the required language. > The selection is confirmed by pressing OK. > If you agree to the request contained in this prompt, press the OK button. > Then select the desired voice. When the Navigation device is started for the first time, the language selection is displayed automatically.
>>> GENERAL OPERATION For devices without the I/O switch on the underside: > Press the switch on the top of the navigation device for longer than 3 seconds to finally switch it off. Note: We recommend that you place the Navigation device in sleep mode in the event of short interruptions to operation (of up to a week). This significantly reduces the switch-on time and the Navigation device finds the satellites required for navigation much faster.
GENERAL OPERATION Basic information about the menus You can tell whether a telephone is already connected by the symbol on the Phone button. During operations, you are assisted by various menus and entry windows. The main menu The top menu level is the main menu. The individual applications are started from the main menu. 2 1 1 2 If route guidance is already active, the current destination address and a button for cancelling route guidance will be displayed between the two rows of buttons.
>>> GENERAL OPERATION Entries made with the entry menu Some applications require entries to be made via the entry menu. The entry menu is operated in a similar way to a keypad. The keyboard layout can be switched between ABC and QWERTZ, see page “Keyboard layout” on page 134 The character entered on the keypad is displayed in the top line of the entry menu. The central area is used to enter characters. Help functions are provided in the right line.
GENERAL OPERATION Scrolling through the lists If you have already entered some of the letters of the selection you want, you can use the selection list to display all the destinations containing the combination of letters in question. > To call up the selection list, press the key. Note: The quantity of selection options is displayed in the form of the number on the button. When there are more than 300 options, the precise number is not displayed.
>>> GENERAL OPERATION Other character sets Different character sets can be selected for the keyboard of the Navigation device. > Press the button marked with an arrow repeatedly until the desired character set is selected. 32 Entering numbers Switch to the numbers keyboard in order to enter figures. > Press the button. The numbers keyboard is displayed. > In order to return again to the keyboard for entering letters, press the button marked with an arrow.
GENERAL OPERATION Deleting characters To delete the last character, use the back key. The back button The button is located on the bottom left of the device. > To delete the character to the left of the cursor, press the key. Inserting spaces If you have an entry with two words, e.g. for names of towns, the words should be separated by a space. It has various functions: • Depending on the menu context, if pressed briefly, you will be returned to the previous entry level.
>>> GENERAL OPERATION Installing the Content Manager You can install the Content Manager on your computer with the following steps: > Switch the navigation device completely off, see “Devices with magnetic holders” on page 26. > Connect the USB interface of the device directly to a USB port of the computer using the USB cable supplied. > Switch on the navigation device.
GENERAL OPERATION > Click on Start > All Programs on the computer. > Select Becker. > Click on Content Manager. When the Content Manager is started, the program executes a number of steps before you can start to manage your navigation software content. Each time the program is called, a connection is established to the Internet to check whether a new version of the ContentManager is available. If a new software version is found, the Content Manager gives you the option of installing it.
>>> GENERAL OPERATION Faults Malfunctions in the operating system or in the unit are displayed accordingly. If the function you want cannot then be executed, you should restart the Navigation device using the On/Off switch. If the messages reappear or the unit doesnot function correctly for any other reason, please contact your local dealer. You can also try to find a solution to your problem in the FAQ in the Support area on the Becker homepage (www.mybecker.com).
NAVIGATION MODE What is navigation? Navigation Mode The term "navigation" (lat. navigare = to travel by sea) is generally understood to mean the determination of a vehicle’s location, the determination of its direction and its distance from the desired destination and the required route to get there. Stars, prominent landmarks, compasses and satellites etc. are used as navigation tools. With the Navigation device, the location is determined by the GPS receiver.
>>> NAVIGATION MODE Selecting Navigation Note: The menu items Set current position and Select from last destinations (fast access mode) can also be used to select a destination. Navigation mode is called up from the main menu. New destinations can be entered in the menu "New destination". Destinations that have already been visited or saved can be selected in the menu My destinations. > In the main menu, press the button My destinations.
NAVIGATION MODE Last destinations list Here you can set the new home address for example using an intelligent text entry field. Smart Guess The two addresses that can be selected with the button, is a selection of the addresses last visited. Depending on the time of day and your current position, the two most likely destinations are displayed and can be selected directly. The last destinations visited and saved destinations are displayed in the Last destinations list and can be selected directly.
>>> NAVIGATION MODE Icons used The following icons are used in the destination list: Icon 40 Meaning This destination is a standard destination with no special features. This destination is protected. If the destination memory is full, this destination will not automatically be deleted. This can be performed manually, if required. In the case of a protected entry, you can also determine the position using the fast access function.
NAVIGATION MODE Option Remove protection Move up Move down Delete entry Delete all entries Meaning The protection is removed from the destination. This function is only available for protected destinations. The destination is moved forwards by one position. If the destination is moved it is automatically protected. The destination is moved back by one position. If the destination is moved it is automatically protected. The destination is deleted from the fast access mode.
>>> NAVIGATION MODE A list of the available destinations will be displayed. Using the buttons or the scroll wheel, it is possible to scroll through the list. Note: If the list contains numerous entries, it may be a good idea to search for the desired destination by selecting Search entry and using the input menu. A maximum of 1000 destinations can be imported. Newly imported destinations are filed at the start of the list. > Select the desired destination.
NAVIGATION MODE 10 entries, a list of contacts is displayed straight away. > In the input menu, select the first letters of the entry you are looking for. > Press the button when the name you want is displayed in the top line. If there are 5 or fewer entries available with the letter combination entered, a list containing these entries will automatically be displayed. Note: You may also first have a list displayed that corresponds to the letter combination entered.
>>> NAVIGATION MODE Layout of the New destination menu Enter address The various steps from selecting an address to starting route guidance can be carried out using the Enter address button. • See "Entering the address" on page 44. Select Point of Interest Points of interest such as airports and ferryports, restaurants, hotels, petrol stations or public buildings can be selected and route guidance started using the Select Point of Interest button. • See "Points of interest" on page 52.
NAVIGATION MODE Selecting a country You can select a country from those available using the button for the country of destination. A country is adopted automatically in the address input menu after selection. If a country of destination has already been entered it will remain until you select a different country. > Press the button containing the country of destination to access the country selection list. The selection list appears. > Press the button for the desired country.
>>> NAVIGATION MODE Selecting a town The destination can be entered by either using the name or ZIP code. When you enter the letters of a place, the navigation device displays suggestions (See "Accepting proposals" on page 30). If you do not want to accept the proposal, just enter the other letters of the location you want. The Navigation device excludes all impossible letter combinations and ZIP codes and activates only letter fields or numerical fields that lead to an existing location or ZIP code.
NAVIGATION MODE Selecting the street In the Street menu field the street and house number can be entered separately using a letter and number field. The Navigation device excludes all impossible letter combinations and activates only those letters that could give an existing street name. A house number can only be chosen once the street has been selected and if house numbers are included in the data.
>>> NAVIGATION MODE Selecting a house number After entering the destination town and street, you can enter a house number so as to further limit the choice. Note: Instead of entering the house number, you can also enter a junction. However, it is not possible to enter both at the same time. > Press the No. button. The input menu for the house number will appear. > Enter the house number and then press the button.
NAVIGATION MODE Note: The symbols above the progress bar refer to restrictions that you may have activated (e.g. unpaved roads, toll roads). If the route guidance is already running and a waypoint has already been entered you will be asked whether the new destination should replace the old destination or the waypoint.
>>> NAVIGATION MODE If your entry is unique, after a short time the menu for entering addresses will be displayed with your entry filled in. Entering address by speech (selected models) You can start the spoken address entry from the address entry menu by pressing the button. Notes: • Only one address can be entered using the voice entry function. Lists for more precise selection cannot be operated using speech. • The destination country cannot be entered using speech.
NAVIGATION MODE If your entry was not unique or the Navigation device was not able to uniquely assign your entry, you will be shown appropriate lists. You can then select the address you want from these lists. Depending on your entry, lists with town names, lists with street names or combined lists with town and street names can be displayed. Note: Voice entry can be restarted at any time in the lists by pressing the button. The following example shows a list in which a town can be selected.
>>> NAVIGATION MODE or you have not set a home address (because this is the first time you have used the device), these fields are greyed out. • Block road If there is not currently a route activated, this field is greyed out. More... Points of interest are divided into different categories. Route guidance is also activated in the screenshot above, so the device asks if the petrol station should be located on the route or near the destination.
NAVIGATION MODE Note: You can only select points of interest in the area in question if the GPS reception is adequate for determining a position. Otherwise, the last position stored will be used. You can extend the places of interest stored on the device by installing additional POIs in KML format on your device via the Content Manager. > In the main menu, press the button New destination. Point of interest in the vicinity > Press the POI nearby button. > Press the Select Point of Interest button.
>>> NAVIGATION MODE If you have selected the category, any points of interest belonging to the relevant category and available within the area in question will now be displayed. The name, distance as the crow flies and the address is displayed for each entry. 54 > Select the desired point of interest. You will now receive additional information about your chosen destination. > Press the Start button to begin route guidance to the point of interest directly.
NAVIGATION MODE By pressing of the button next to the selected POI, you can display the additionally available information for the destination. > Press the Start button to begin route guidance to the point of interest directly. However, you can also store your chosenpoint of interest in fast access mode (Save) or display the route to the point of interest (Show route). Note: Your can also press the Select Point of Interest button.
>>> NAVIGATION MODE > Press the Start to begin route guidance to the point of interest straight away. However, you can also display your chosen point of interest on the map (On map), store it in fast access mode (Save) or display the route to the point of interest (Show route).
NAVIGATION MODE Selecting a destination from the map You may also select a destination directly from the displayed map. > Press the Select on map button. The map display appears. Note: You may need to make the area larger using the zoom buttons and in order to find the desired point. You can also move the map to the desired point. > Press the desired point lightly on the surface of the screen. A flashing red cross will be displayed at this point.
>>> NAVIGATION MODE Coordinate entry You can also enter your destination using geographic coordinates. > In the main menu, press the button New destination. > Press Enter geo-coordinates. 1 2 3 > Using 2 select the value you wish to change. > Using the two buttons indicated by 1 select the direction required for the geographic longitude and latitude (east/west or north/south). 58 > Then enter the desired values using the buttons to . The entry field at the beginning may be displayed greyed out.
NAVIGATION MODE >>> By pressing Add stage you can now add a stage to the route. After pressing Rename route you can give the route a new name. Pressing Delete route will allow you to delete the route from the stored routes. Note: If no routes have yet been stored, the route menu is empty. Selecting and starting a route > Press a route to select it. The route is loaded and displayed in the stage menu.
>>> NAVIGATION MODE Simulation of the route There is a play button on the left under the map, used to start a simulation of the route. If you touch the display after starting, a control bar is displayed at the top with control buttons for the simulation. You can pause the simulation with the button, and continue it with the button. The button allows you to fast forward the simulation by a 16x speed. You can move from route section to route section with the and buttons.
NAVIGATION MODE Editing a route > Select the route you wish to edit. > Press the button in front of the stage you wish to edit. Option Move down Delete stage > Press Add stage to enter further intermediate destinations as described above. > When you have entered all intermediate destinations, press the Done button. Replace stage >>> Meaning The stage is moved backwards by one position. The stage is deleted from the route. You can replace the selected stage with another intermediate destination.
>>> NAVIGATION MODE Optimising a route If you have entered several destinations for a route, you can use the Navigation device to optimise the order of the destinations for the journey distance. The route stored is retained even after optimization, however. Call up the map display for the stages of the route. Navigation settings The navigation settings contain all the settings that are relevant to the navigation functions. Note: All your settings must be confirmed by pressing the button.
NAVIGATION MODE The Map view button You can select whether the map is to be displayed in 3D or 2D mode, in a split screen with 3D or 2D display or in arrow mode. You can also select whether or not 3D buildings available in towns should be displayed in 3D mode. Further setting options are available to you in the extended settings. >>> > Press the button 4 or 5 to select whether to use 2D or 3D mode. > Press the button 1 to select the entire map. > Press the button 3 for arrow mode.
>>> NAVIGATION MODE The following setting options are available in the extended settings: • Auto zoom You can select how the map changes when approaching an action point or at different speed. • Select POI categories You can select which symbols are displayed for points of interest on the map. • Infobox data fields In this menu you can define the data to be displayed in the Info box in the top left corner of the map view. You can select between Speed, Speed limit, Time and Height.
NAVIGATION MODE >>> Select POI categories You can select which POI symbols are to be displayed on the map. > Press the Select POI categories button in the extended settings. Selecting Show all POIs displays all points of interest on the map. Selecting Show no POIs displays no points of interest on the map.
>>> NAVIGATION MODE Under these options, you can select displays for the travel without a selected route. Here you can only select between Speed, Speed limit, Time and Height. 3D city view With this option, you can select whether or not 3D buildings available in towns should be displayed in 3D mode or not. In the Advanced menu, press the 3D city view button to turn the function on or off. > Confirm your setting in the Advanced menu by pressing the button.
NAVIGATION MODE If you touch the preset option of one of the POI Categories (POI 1, 2 and 3), a selection list with 20 POI types appears. The Guidance info button Setting In the Guidance info settings window you can select which additional information you would like displayed during route guidance. > Press the Guidance info button in the settings menu. Signposts Detour Assistant The Guidance info settings window appears.
>>> NAVIGATION MODE Setting Meaning Country info When this function is enabled, you will automatically receive generally applicable traffic information for the relevant country when you cross a national border (e.g. speed limits). Lane Assistant If this function is actiPro 3D vated, you will see an animated, realistic representation of your lane at many junctions if available.
NAVIGATION MODE Selecting the vehicle profile (depending on model) This setting influences the calculation of the expected time of arrival and blocks e.g. motorways for the bicycle setting. > Select the mode of travel or the required vehicle profile after pressing the Vehicle button. 4 3 2 1 5 6 5 6 7 8 The different profiles are displayed and you can select the desired profile by pressing the appropriate button.
>>> NAVIGATION MODE Truck and mobile home functions (depending on model) You can select or set the vehicle profile. For the truck profiles (depending on the model), you can define or select dimensions, weight, number of axles etc. Once the appropriate profile is set, a route is calculated on the basis of these settings. See also the chapter on supplementary functions for trucks and mobile homes on page 104.
NAVIGATION MODE Setting truck profiles Notes: This function is only available with models with optimized route navigation for trucks, busses and mobile homes. > Select one of the saved truck profiles or the general truck profile. 6 With the three saved truck profiles you have the option to customize the truck symbol 5 and name 6 7 The window is displayed for selecting the maximum speed Setting size > In the profile settings, press the button for setting the size.
>>> NAVIGATION MODE > Press the button next to the weight to be entered. An entry menu will appear. > Enter the desired weight. > Confirm the entry in the entry menu by pressing . Once you have made all the required settings, confirm your settings by selecting . Setting hazardous materials class > In the profile settings, press the button for setting the hazardous materials class. > Select the required hazardous materials class.
NAVIGATION MODE > Press the 2 button to change the displayed symbol. Selecting the route type > After pressing the Route type button, select one of the following options. Option Fast route > Select the desired symbol. The new vehicle category is displayed in the profile. Economical route Short route Easy route Meaning With this option, the fastest route in terms of travel time is calculated.
>>> NAVIGATION MODE Avoiding particular types of road After pressing the button Avoid you can exclude various types of road (e.g. motorways, ferries and toll roads), from the route calculation. You can set one of the following options for each of these road types. The TMC button Option Permitted The TMC settings window appears. Prohibited Meaning With this option, the road type in question is included in calculating the route.
NAVIGATION MODE The Traffic Button (model dependent) The Voice guidance button When the navigation device has access to the server, the heading Traffic and another icon are displayed instead of TMC. The traffic announcements will always then be retrieved updated from the server. The settings are the same as described in the chapter entitled TMC. In the Voice guidance settings window you can make settings relating to the voice guidance of the Navigation device.
>>> NAVIGATION MODE • Announce streets Using the Announce streets button you can switch the announcement of the names of streets into which you are to turn on ( ) or off ( ). • Announce time of arrival Using the Announce time of arrival button you can switch the automatic announcement of the expected arrival times on ( ) or off ( ). Note: The Announce streets and Announce time of arrival functions are only supported by speakers with the TTS function.
NAVIGATION MODE The Warnings button In the Warnings settings window you can select which warnings are to be displayed by the Navigation device or which warning sounds are to be output. > In the settings menu, press the Warnings button. The Warnings settings window appears.
>>> NAVIGATION MODE Setting Driver alerts If this information is saved in the map material and is supported by your navigation device, you can display information signs, e.g. for dangerous bends or descending gradients. In addition, you can define whether the display of the sign is also to be accompanied by a warning sound. > In the Warnings settings window, press the Driver alerts button. The Driver alerts settings window appears.
NAVIGATION MODE tively. By pressing the symbol with the bell, you can set the audible warning signal ( audible warning signal activated). > Confirm your settings by pressing the button. >>> Setting Speed info The Speed info settings window allows to select whether speed limits are displayed in parallel to the navigation. You can also receive an audible warning about exceeding the speed limit. Note: This information can only be displayed if it is contained in the map material.
>>> NAVIGATION MODE Setting Out of city Alert Voice output Meaning Select the amount over the speed limit at which you would like to receive an acoustic warning within built-up areas. An audible signal is to sound when exceeding speed limits. A speaker’s voice warns you of exceeding the speed limit.
NAVIGATION MODE You can now set whether or not the road should be blocked for each day of the week. > Confirm your settings by pressing the back button . or > Press the button under one of the days and set up to two times when the road should be blocked. 1 1 1 1 2 2 2 2 Note: Press the Block 24 h, button to set a block for an entire day. Press the Use setting for... button to also use the block on other days. > Confirm your settings by pressing the back button .
>>> NAVIGATION MODE > Press the Extra-urban button to enter the average fuel consumption of the vehicle outside cities. This can be entered as described for the In city value. The Format button The Time button In the Format settings window you can set the measurement units to be used for times and distances. > In the settings menu, press the Format button. You can select the time zone relevant for your location in the Time settings window.
NAVIGATION MODE The Reset button You can reset the navigation settings to their factory settings. The settings will then be reset. The fast access mode data, stored routes, blocked routes, voice and home address are retained. > Press the Reset button. > Press the Yes button. The navigation settings are reset to their factory settings. Traffic announcements using TMC (depending on the model) Your Navigation device can receive traffic announcements (TMC messages) from radio stations.
>>> NAVIGATION MODE Live Traffic - Traffic Announcements via Data Connection (model dependent) Your navigation device can receive traffic announcements from a server via a data connection. These announcements are more up-to-date than data received via TMC and are also available more quickly. There must also be an appropriate data connection. Subsequent use of the traffic announcements is the same as described below for TMC.
NAVIGATION MODE The part of the route with the travel direction 4 If a TMC message lies on your route, the message is indicated by the sign . Traffic announcements received via Premium-TMC are indicated by the symbol. Using TMC When the Navigation device has been attached to the carrier plate (power supply with the integrated TMC antenna connected), your Navigation device will receive up-to-date traffic announcements. It is then possible to calculate dynamic routes (traffic jam diversion).
>>> NAVIGATION MODE Reading a message > Press on the desired message in the list. The message display appears on the top of the screen, while a map is displayed below it with the related route section. Press on the message again to display more information on the traffic obstruction. By pressing it again, the extra information disappears. The message display appears. > Press the arrow buttons to scroll in the messages. > Press the button to return to the message list.
NAVIGATION MODE The red route or route marked blue for an obstruction shows the previous route. The route marked yellow displays the alternative route calculated. In the right section of the display, you can see how much the route changes and how much time you will likely save if you use the alternative route. > Now either press the OK button to use the alternative route or press the Reject button to continue using the existing route. The map display The map display is used primarily for route guidance.
>>> NAVIGATION MODE 1 2 3 4 5 6 7 Speed limit on the road currently being driven on (display not available for all roads), signs for the driver alerts will also be displayed Zoom buttons Power level/telephone status (depending on the model) Button for calling up the options Vehicle position Current road Information box (if displayed) showing vehicle speed and altitude above sea level Map display with route guidance 14 1 6 2 3 13 7 12 11 Power level/telephone status (depending on the model) 5 But
NAVIGATION MODE If you press the Info box again, more or less fields are displayed. At least one field and a maximum of three fields can be displayed. The information displayed depends on the settings that are selected in the Navigation settings in the map view menu > Advanced > Info box data fields. The following can be selected: • With selected route 1 : Remaining distance to destination, remaining travel time, arrival time at the destination, speed, speed limit, time and and height above sea level.
>>> NAVIGATION MODE Note: If you follow the lane recommendation, the next driving maneuver is possible without changing lanes. 8 9 10 11 12 13 14 15 Next driving maneuver Current street or street to which the next driving maneuver leads Distance to the next driving maneuver Bar display to illustrate the distance to the next driving maneuver Button for SituationScan Calls up volume settings Information box Button for Route overview (only with the selected route active.
NAVIGATION MODE Map display with Junction view You can display a detailed and realistic view of the lane situation at many motorway junctions. To do this, switch on the Junction view function as described under "The Guidance info button" on page 67. If you are then directed through a motorway junction by the Navigation device, you will see a corresponding display. Tunnel view When your enter a longer tunnel, a three dimensional tunnel view appears.
>>> NAVIGATION MODE Using the map display Repeating the last announcement During route guidance, the system announces important information, e.g. the next driving manoeuvre. The last announcement can be repeated with updated information. > Press the speaker symbol in the preview area while route guidance is active. The last announcement is be repeated with updated information. The volume is also displayed.
NAVIGATION MODE Map zooming The map can be zoomed into in steps by using the zoom buttons. > Press the button. The zoom buttons are displayed. Moving the map You can move the map to any point. > To do this, press the map briefly. > Press zoom in to "zoom in on the map" and therefore to get closer to the details displayed. > Press zoom out to "zoom out from the map” and therefore to obtain a larger overview. > Press the button to switch back to the set zoom step after a change.
>>> NAVIGATION MODE You can orient the map for example in the direction of travel. If you have selected a 3D display for the map view, the vertical display angle can be adjusted, too. > Press the 3D map view on the display a little longer. The viewing angle will be lower and the horizon is moved back after a while into the image. > Press the button. The viewing angle will be steeper. If the angle is exactly 90°, you are viewing the map in the 2D view from the top.
NAVIGATION MODE The red line in the middle of the screen represents your route. If this line ends with two points, then the list continues and you can scroll through the complete list by moving your finger. Note: If there is a traffic jam announcement on the route, the TMC symbol appears on the button. If there are no traffic jams reported on the route, the POI symbol is displayed instead. SituationScan At cross-border destinations, the border crossing is displayed with the appropriate national flag.
>>> NAVIGATION MODE lot to the destination are governing for the selection. > Touch a parking possibility on the map to select it. You can then have the route leading there displayed and the route guidance started. You can have the device lead you to the destination in pedestrian mode at the arrival at the parking place. Map display options In the map display options, you can change the settings for route guidance, the map display and the route. On the map display, press the button on the bottom right.
NAVIGATION MODE Displaying the whole route Move route (model-dependent) (Only available when route guidance is active.) You can have the whole route to the destination displayed on the map. Additionally, you can have a complete route description displayed. As a further option, you can display and, if needed, select the different routes that can be set in the Route options. > Call up the options menu for the map display.
>>> NAVIGATION MODE The first point of the route description is displayed on the map. You can scroll through the whole route and Back description with the Next buttons. Blocking route sections/roads You can block individual route sections/ roads. The Navigation device then calculates a sensible diversion to avoid the blocked section. > Use the and buttons in the route directions to select the section of the route to be blocked. > Press the Block button.
NAVIGATION MODE Selecting alternative routes Change route options Canceling route guidance You can have the different routes displayed by the navigation device. > When the whole route is displayed, press the Alternative routes button. (This function can be selected in the Route overview, too.) After a short time, the map is displayed. Each route is calculated after each other and displayed on the map.
>>> NAVIGATION MODE Entering/deleting a stopover Blocking route temporarily (Only available when route guidance is active.) With this function, you can enter a stopover, or you can delete an entered stopover. > Call up the options menu for the map display. Using the Block road ahead option, you can block a stretch of road ahead temporarily. This determines a certain stretch of road that should not be used. The Navigation device will now try to calculate a detour. > Press the Add stopover button.
NAVIGATION MODE If route guidance is active, you can select a road length between 200 m and 50 km. As soon as you selected the stretch, a new route will be calculated. Furthermore, the distance and time difference are also displayed in the lower part of the display. Setting day/night display Notes: • If route guidance is not active, you can only select between 200 and 500 m (250 and 500 yards). You can then define directly the days and times when the route should be blocked.
>>> NAVIGATION MODE number 112 (depending on model) if a mobile telephone is connected to your navigation system and has reception. Before dialling the emergency call number, you must confirm this once again. The emergency call number is dialled using the call button. An address or the GPS position will be displayed depending on availability. If possible, you can change between the views using the buttons or . In addition, you have other telephone functions at 102 your disposal.
NAVIGATION MODE Entering the destination (Only available when route guidance is not active.) You can enter a destination. > Call up the options menu for the map display. > Press the Enter destination button. You can now enter a destination as described under "The New destination menu" on page 43 (Home, Enter address, Select Point of Interest, Personal destinations, Contacts, Route planning, Select on map or Enter geocoordinates).
>>> SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) Depending on the selected settings (see page 71 onwards), a number of helpful supplementary functions are made available to you. Supplementary functions for trucks and mobile homes (selected models only) Feedback after route calculation When calculating the route, the best possible route is selected by taking the vehicle or loading specifications into consideration if possible.
SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) described in the chapter "Feedback after route calculation". You have the following options: 1 Press the button to close the message. 2 enlarge the display area if another restriction lies ahead of you. The message will close automatically once you have left the critical area. In addition, the message closes automatically when you approach a new road section with a restriction.
>>> OTHER ADDITIONAL FUNCTIONS (ONLY SELECTED MODELS) Display height profile You can display a height profile from the Show route or Alternative routes view. To do this, select the button. Other additional functions (only selected models) Height profile for alternative routes: Height profile for a route: You can use the and buttons to adjust the zoom level and move to the left or right to shift the height profile.
TELEPHONE MODE If your navigation device has an integrated Bluetooth® wireless technology interface, you can connect it to a mobile phone equipped with Bluetooth® wireless technology. Your Navigation device can then be used as a very comfortable hands-free unit. Telephone mode Note: • For some cell phones equipped with Bluetooth® wireless technology, it is possible that some of the functions described are not available. • The following descriptions assume that Bluetooth® is activated on the cell phone.
>>> TELEPHONE MODE The Navigation device now attempts to reconnect the cell phone last connected. When the connection is established, the telephone menu is displayed after a short period. If no cell phone has been connected yet or if the device last connected is not available, the following display is generated. > Press the Yes button to find Bluetooth® cell phones as described in "Searching for cell phones" on page 114.
TELEPHONE MODE Note: Press the button to delete the characters entered. > Press the Dial button. The Navigation device then attempts to establish a connection to the phone number entered. You can find out how to continue operation in "Telephone calls" on page 116. Phonebook In the phonebook, the system displays the phonebook entries loaded from the SIM card and from the memory of the cell phone. After selecting the desired entry, you can call the respective phone number.
>>> TELEPHONE MODE > In the input menu, select the first letters of the entry you are looking for. Note: • For example,if you entered the letters "M" and "I", the entries are displayed whose last names or first names start with "MI". That means, "Miller John" or "Bauer Michael". • You may enter the first letter of the last name and then enter the first letter of the first name separately using a space (button ).
TELEPHONE MODE Call list In the call list, the last dialled, answered or unanswered numbers or names are displayed in chronological order. If possible, the numbers or names of the list stored in the cell phone are also displayed in different lists. > In the telephone menu, press the Last calls button. Each row of the call list is divided into fields. Each list field is designed as a button. On the right button, the number/ name is displayed and the features of the entry are displayed with the left icon.
>>> TELEPHONE MODE Dialing an available number You can dial the numbers/names in the call list directly. > To initiate the call, press the button with the entry you want. The call will be initiated. Displaying or editing entries Each entry contained in the call list can be displayed or edited. > Press the button field on the left next to the entry you want. A selection menu appears. Selection Meaning Show details The data for the entry is displayed (number and name, time and date of call, if available).
TELEPHONE MODE Connecting Bluetooth® telephones So that you may make and receive calls with your Navigation device, a cell phone that is equipped with Bluetooth® wireless technology must be connected to the Navigation device. The following describes the various options for establishing a connection. Calling up a device list > In the main menu, Telephone button. The device list shows line by line all cell phones that were already connected to the Navigation device.
>>> TELEPHONE MODE Automatic connection After activation, your Navigation device attempts to establish a connection to the cell phone last connected. You can switch this function on or off as described in "Automatic connection" on page 119. Prerequisites for a successful connection are: • On your Navigation device, Bluetooth® wireless technology is switched on. (See "Bluetooth®" on page 119.) • The cell phone is switched on, is within range, and Bluetooth® wireless technology is activated.
TELEPHONE MODE Connect new devices You can initiate a connection to another mobile phone using the Devices button located in the telephone menu at the lower right hand corner of your screen. If a cell phone is already connected, that connection is automatically disconnected and the new device is connected. > Click on Devices Connecting a mobile phone You can also attempt to establish a connection to the Navigation device from the mobile phone.
>>> TELEPHONE MODE Telephone calls In the telephone calls section, you can find a summary of the control options that are available for establishing a call, accepting a call, and ending a call. Accepting a call For an incoming call, a ringing tone will sound. Also the following is displayed. Establishing a call > Enter the telephone number or select an entry from the call list or telephone book. If the call is accepted by the party called, the display changes and you are connected to the other party.
TELEPHONE MODE Ending a call During a call You can end an active call. During a call, you have various control options. >>> > To call the options menu of the call screen, press the Options button. > In the call screen, press the End call button. The call is ended. The screen last active is displayed. Note: The call is also ended if the other party hangs up. The screen last active is also displayed.
>>> TELEPHONE MODE • Private mode/Hands free You can transfer a call back to the cell phone. The hands-free function is then ended. After the call is ended, the connection to the cell phone is automatically reestablished. Press the Private mode button. The hands-free function is ended. Press the Hands free button to make and receive calls again via the Navigation device prior to ending the call. Telephone settings The telephone settings include all the settings relevant for the telephone mode.
TELEPHONE MODE Bluetooth® Automatic call acceptance Telephone volume With the Bluetooth® button, you can switch Bluetooth® on or off. With this function, you can set whether or not or after which time an incoming call is accepted automatically. With this function, you can set the volume of the ringtone and the volume of the call. > In the settings menu, press the Answer call automatically button. > In the settings menu, press the Volume button.
>>> TELEPHONE MODE Updating the phonebook Bluetooth® name With this function, you can update or retransfer the stored phonebook entries in the Navigation device. With this function, you can assign a name for your Navigation device. This assigned name will then be displayed by other Bluetooth® devices. > In the settings menu, press the Refresh button. Be aware that it may take several minutes to load the phonebook. > In the settings menu, press the Bluetooth® name button. > Enter the desired name.
TOOLS Under Tools, the following functions are grouped together, depending on the model: • Marco Polo City Guides • Image viewer • Country information • Overview of functions • Blocking a section of the road • Trip computer The Tools menu is called up from the main menu. Tools Travel Guide (model dependent) With the travel guide, you can select, for example, MARCO POLO TopHighlights or MARCO POLO Insider Tips and start the guide destination there. See "Travel Guide (model dependent)" on page 56.
>>> TOOLS The image viewer menu Selecting an image In the image viewer menu, you can select images, start a slide show and call up the settings. 3 A message is displayed stating that the image viewer must not be used when driving. Please observe this warning. > Confirm the message by pressing the OK button. The image viewer menu appears.
TOOLS Press the buttons to the left and right of the image to move to the next or previous image. Press the centre of the image to hide the image menu. Press the right- or left-hand side of the screen to move to the next or previous image. Press the centre of the image to show the image menu again. Enlarging the image > Show the image menu. > Press the Zoom button. Displaying image information > Show the image menu. > Press the EXIF button.
>>> TOOLS Slide show Traffic forecast (depending on model) In the slide show, all the pictures in the current folder level are automatically displayed sequentially. > Press Slide show in the image viewer menu. The image display changes to full screen display and initiates the slide show according to the settings made, with the first image in the current folder level. The slide show will end once all images have been displayed. Press the button to stop the show before the end.
TOOLS • With the and buttons you can change the section of the map. • With the button you can display the complete route on the screen if available. >>> Country information The country information enables you to display country-specific information for numerous countries (maximum permitted speed, alcohol limits, etc.). The country-specific information is displayed (maximum permitted speed, alcohol limits, etc.). Click on these symbols to display additional information.
>>> TOOLS Symbol Meaning Speed limit in built-up areas Speed limit outside built-up areas Speed limit on motorways Speed limit on main roads Alcohol limit Reflective jacket requirement Driving lights requirement during daytime Tow rope must be carried Blocking a section of the road permanently With the Block option you can block individual route sections permanently. The Navigation device then calcu-lates a diversion to avoid a traffic obstruction.
TOOLS > Using the buttons 1 set the first period when the road is to be blocked on this day. > Using the buttons 2 set the second period when the road is to be blocked on this day if necessary. The road is currently blocked for all days of the week, for the whole day . You can now set whether or not the road should be blocked for each day of the week. > Press the buttons with the days on which the road should not be blocked .
>>> TOOLS Travel time without breaks in the journey 7 Travel time with breaks in the journey 8 Compass 9 Calls up the stopwatch with lap recording Press the Stop button to stop the recording. The time continues if you press the Start button again after stopping the recording. Press the Reset button to delete all recordings and reset all times to zero. 6 Press the Reset button to reset the values to zero. > Press the Lap button to stop the current recording and start a new lap recording.
SETTINGS Selecting system settings Settings You can change various basic settings for all applications on the Navigation device. > In the main menu, press the button. The system settings menu You can select the various settings optionsfrom the system settings menu. >>> Operation Selection options Select the desired menu item by pressing the appropriate button. The functionality of the buttons varies depending on the selection and is described under "The individual menu items" on page130.
>>> SETTINGS The individual menu items Battery Your Navigation device may be operated using an external power supply unit or an integrated rechargeable battery. Note: The current charging state is important when operating with a battery. If the battery is low on power, it may not be possible to continue navigation right to the destination. The power level is shown in the charge display. In the example, the battery still has around two-thirds charge.
SETTINGS • Bottom icon: The function is switched off, the Navigation device does not switch off automatically. The following display is shown during automatic switch-off. You can cancel the automatic switch-off procedure by pressing the Cancel button. Day/night display You can set the Navigation device display to day, night or automatic. The automatic setting changes automatically between day and night display depending on the time, the current position and the time of year.
>>> SETTINGS Design by day With this option, the menu and map display during the day can be switched to the colours and contrast of night display. Design by night Two schemes with different contrasts are available to select for the map display at night. Press the Design by night button. > Press the Design by day button. Select the option on the bottom to set a lighter night display for the map view. > Select the Dark design option for a dark display during the day.
SETTINGS Setting the colour You can change the colour of the icons and other design elements. Language The texts on the touch screen can be displayed in a variety of languages. > Press the Colour schemes button. Opening language selection You can choose between the various languages using the following button: 1 2 > Press the Language button. The language selection appears. > Select one of the eight predefined colours. or > Select the required colour using the slider 2 at the bottom of the display.
>>> SETTINGS Keyboard layout You can switch the sequence of the keyboard layout by selecting the corresponding key. Sounds You can switch the Navigation device signal tone on and off. This also includes the clicking of the touch screen buttons. > Press the Tones button. Depending on the previous setting, the signal tones are switched on or off. Selection Meaning Manual It is possible to manually switch over to the reversing camera.
SETTINGS Driver profiles (depending on model) You can select 4 different driver profiles. You select the corresponding profile by pressing the Profile 1 – Profile 4 button. You must then restart the navigation system. The following ..
>>> SETTINGS Deleting driver profile You can delete the saved profile data by pressing the Delete profile button. The profile itself will still remain. If the profile was renamed previously, it will then be renamed to the original name again (Profile 1 – Profile 4). 136 Driver profile Pro (model dependent) Besides the functions described in the previous chapter, a Bluetooth® telephone can be used for automatically changing the profile on devices with Driver Profile Pro.
SETTINGS Service information The following button displays information regarding the Navigation device. > Press the Information button. The information display appears with the software version number. Factory settings You can reset your Navigation device to the factory settings. The following updated data is deleted: saved destinations, saved routes, the home address, telephone data, images, videos etc. saved on the internal memory.
>>> WIFI SETTINGS (MODEL DEPENDENT) You can establish a data connection to a WiFi network (a telephone, for example) from your navigation system. This function requires that there is a mobile device in range which can be used as a WiFi hotspot. Please refer to the operating instructions for your smartphone to see if/how you can use your smartphone as a mobile hotspot. Press the WiFi settings button in the Settings menu. network, you can select it from this list without having to enter a password again.
TECHNICAL TERMINOLOGY GMT (Greenwich Mean Time) Central European Time standard Standard time at 0 degree longitude (the longitude intersecting Greenwich, Great Britain). This time is used worldwide for synchronization of data collection. Technical terminology Bluetooth® wireless technology Technology for wireless data transmission at short range up to 10 metres. GPS (Global Positioning System) GPS determines your actual geographical position by the use of satellites.
>>> TECHNICAL TERMINOLOGY Stylus A stylus is an input pointer which is used for the operation of touch-screens, mobile phones or PDAs. The stylus consists basically of a plastic pointer with a softer plastic core. The sleeve is hard and can be gripped and the softer core emerges at the tip and is designed to touch the screen as softly as possible (i.e. without the danger of scratching the screen). The stylus is more accurate than operation using the fingers, since only the thin tip touches the screen.
index INDEX Numerics 3D display . . . . . . . . . . . . . . . . . . . . . . . . . 63 A Adjusting the map view . . . . . . . . . . . . 63 Announce streets . . . . . . . . . . . . . . . . . . 76 Automatic call acceptance . . . . . . . . .119 Automatic connection . . . . . . . . 114, 119 B Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 Blocked roads . . . . . . . . . . . . . . . . . . . . . 80 Blocking a section of the road . . . . . .100 Blocking a section of the road permanently . . . .
>>> INDEX I N R ID3 tag . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Image viewer . . . . . . . . . . . . . . . . . . . . 121 Intended purpose . . . . . . . . . . . . . . . . . . .7 Intersection . . . . . . . . . . . . . . . . . . . . . . . 47 Navigation . . . . . . . . . . . . . . . . . . . . . . . . 37 starting . . . . . . . . . . . . . . . . . . . . . . 48 terminating . . . . . . . . . . . . . . . .29, 99 Number list Dialing a number . . . . . . . . . . . . 112 Number lists . . . . . . .
INDEX Short route . . . . . . . . . . . . . . . . . . . . . . . . 73 Slide show . . . . . . . . . . . . . . . . . . . . . . .124 Speed limit . . . . . . . . . . . . . . . . . . . . . . . . 79 Stopover . . . . . . . . . . . . . . . . . . . . . . . . .100 Deleting . . . . . . . . . . . . . . . . . . . . .100 Stylus . . . . . . . . . . . . . . . . . . . . . . . . . . .140 Switching on the navigation device . . 27 System settings . . . . . . . . . . . . . . . . . .129 Vehicle profile selecting . . . . . . . .
>>> MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications 200 g 200 g 200 g 200 g 300 g 300 g Weight 800 800 800 800 800 800 Processor in MHz 4 GB 4 GB 8 GB 4 GB 4 GB 4 GB Flash memory 256 MB 256 MB 256 MB 256 MB 256 MB 256 MB SD-RAM 1250 mAh 1250 mAh 1250 mAh 1250 mAh 1550 mAh 1550 mAh Li-polymer battery TMC Holder for vehicle integration Bluetooth® hands-free device Dimensions in mm 138x85x16 138x85x16 138x85x16 138x85x16 167x103x16 167x103x16 (W x H x D
MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Transit 70 LMU BE J10 Transit 70 LMU Pro BE J11 Professional 70 LMU BE J12 Weight Processor in MHz Flash memory SD-RAM Li-polymer battery TMC Holder for vehicle integration Bluetooth® hands-free device Dimensions in mm (W x H x D): Screen size Display resolution Resistive touch display Capacitive touch display Micro SD card reader USB interface 1 Internal loudspeaker Supply voltage LPS (Limited Power Source) Compatible with HR holders Navigation system Ready
>>> NOTICE Dear customer, In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonized national regulations. This designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility. Interference caused by your unit affecting other electrical/electronic devices, as well as interfering influences on your unit from other electrical/electronic devices are largely prevented.
NOTICE >>> Disposal of the unit Customer information on the disposal of electrical and electronic devices (private households) According to the self-proclaimed corporate principles of United Navigation GmbH, your product has been developed and manufactured from high-quality, recyclable materials and components. This symbol on the product and/or accompanying documentation means that electrical and electronic products must be disposed of separately from the houshold garbage at the end of its service life.
>>> NOTICE Disposal of the battery Duty to supply information according to battery legislation (BattV) Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteries via specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.
NOTICE 4 2 >>> 2 3 1 3 4 1 > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Unscrew and remove the housing screws 1 (model dependent) using a small screwdriver. > Lever off the rear of the housing 2 using a flat-blade screwdriver (placed at the slits on the sides of the housing). > Remove the circuit board if necessary; to do this, you first have to remove the screws of the circuit board (model dependent).
>>> NOTICE For devices without screws on the bottom side of the device (model dependent): > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Lever off the front cover using a flat-headed screw driver (placed between the display and display frame). > Remove the 5 screws. > You can now lever off the front of the device from the back panel using a flat-headed screw driver.
3LGRCBÍ,?TGE?RGMLÍ%K@& &:J<ͱ )ͱEͱ ,LJ Á ͭ Á(KL˓E=>JG - Germany UUU KW@CAICP AMK
