Operating instructions
2
Assembly and Operating Instructions
Table of Contents
General .......................................................................................................................................................................... 2
Warranty ......................................................................................................................................................................... 3
Safety Information ........................................................................................................................................................... 3
Intended Use .................................................................................................................................................................. 5
Mounting and installation instructions .............................................................................................................................. 5
Programming the switching times ................................................................................................................................... 14
Deleting the switching times .......................................................................................................................................... 14
Disposal ....................................................................................................................................................................... 14
Declaration of Conformity .............................................................................................................................................. 14
Technical Data .............................................................................................................................................................. 15
What should you do, if...? ............................................................................................................................................... 15
Brief instructions commissioning PRF+ ........................................................................................................................... 16
The roller shutter drives R8/17C PRF+ to R40/17C PRF+ are high quality products with a wide range of interesting features:
• Radio-controlled individual, multi-point, group and central control
• No wiring required to the switch or to a relay control
• Drive and transmitters may be combined as you wish
• Installation possible without stoppers (lower limit to upper limit)
• Intermediate position setting
• Ventilation position setting
• Flexible radio-controlled group control, which can be changed at any time without complex installation
• The integrated memo function allows an easy programming of up to two switching times with daily repeti-
tions.
• Automatic detection of upper limit via intelligent electronic system
• Automatic detection of lower limit in connection with the anti-lifting lock system (axle shaft safety catch-
es)
• Secure anti-lifting lock system
• Slight pressure applied to the shutters prevents them from being raised or forced open
• Suitable for rigid aluminium, steel and wooden proles
• The limits do not have to be re-set: the shutter is realigned automatically if there are any changes in shut-
ter length due to the use of stoppers at the upper limit
• Emergency stop control in accordance with the European Union Machinery Directive (anti-restart device)
• Torque control prevents the shutter from being damaged in the event of the shutter system being frozen or
blocked
• Optimum closing torque adjustment
• Considerably less strain on the shutter and the stoppers even in systems with insulating plaster
• Longer service life thanks to smooth system and drive operation
• With pluggable Becker connecting cable
Always observe these assembly and operating instructions when installing and setting the device.
General