Operating instructions

8
Assembly and Operating Instructions
b) Lower position to upper buffer
Actuate a brief start command.
Travel to the desired lower nal position.
Move the DOWN direction switch from the delete position to the programmed
position.
Subsequently travel upwards against the permanent upper buffer until the tubu-
lar drive automatically switches off.
The nal positions have now been set.
c) Anti-lifting device at the lower nal position to upper buffer
Actuate a brief start command.
Move both buttons to the programmed position.
Travel to the lower nal position until the tubular drive automatically switches off.
Subsequently travel upwards against the permanent upper buffer until the tubu-
lar drive automatically switches off.
The nal positions have now been set.
Push both buttons to the delete position.
Move both buttons to the delete position.