Operating instructions

111
TELEPHONE MODE >>>
> D
> GB
> F
> I
> PL
Automatic connection
After activation, your Navigation device
attempts to establish a connection to the
cell phone last connected.
You can switch this function on or off as
described in "Automatic connection" on
page 116.
Prerequisites for a successful connec-
tion are:
• On your Navigation device, Bluetooth®
is switched on. (See "Switching
Bluetooth on and off" on page 116.)
• The cell phone is switched on, is within
range, and Bluetooth® is activated.
Searching for cell phones
> Call up the device list.
> Press the
Search Bluetooth phones
button.
The search starts.
During the search, any devices found are
displayed and you may cancel the search
by pressing the
Stop search button.
After the search or after you press the
Stop search, a list of the devices found is
displayed.
Selection Meaning
Protect entry The device is protected
against automatic dele-
tion (only available for
unprotected devices).
Remove
protection
The protection of the de-
vice is canceled (only
available for unprotect-
ed devices).
Move up /
Move down
The device is moved one
position forwards/back-
wards.
Delete The device is deleted
from the device list.
Delete All All devices are deleted
from the list (even the
protected entries).
Note:
The cell phone last connected is then
only connected if no protected device is
in front of this device in the device list.
Note:
Prior to a search, switch on Bluetooth®
on the cell phone to be searched for.