User manual

122
>>> SETTINGS
> D
> GB
> F
> I
> PL
Sounds
You can switch the Navigation device
signal tone on and off. This also includes
the clicking of the touch screen buttons.
> Press the
Tones button.
Depending on the previous setting, the
signal tones are switched on or off.
• Top icon: Tones switched on
• Bottom icon: Tones switched off
Service information
The following button displays
information regarding the Navigation
device.
> Press the
Information button.
The information display appears with the
software version number.
By pressing the
Service information but-
ton, you can display further information
such as used licences, installed contents
and map material. Always quote these
details in enquiries to the service provid-
ed by Harman/Becker.
Factory settings
You can reset your Navigation device to
the factory settings.
The following updated data is deleted:
saved destinations, saved routes, the
home address, telephone data, images,
videos etc. saved on the internal memory.
> Press the
Factory reset button.
> Press the
Yes button.
The Navigation device is reset to the
factory settings.