User manual

91
NAVIGATION MODE >>>
> D
> GB
> F
> I
> PL
By pressing the
Country info button you
can display country-specific information
such as the maximum permitted speed
for the country you are currently in.
By pressing
GPS info you can view
information regarding the GPS
reception.
You can see how many satellites are
being received, and whether the satellite
reception is good enough for navigation.
The current time and the geographic
position are also displayed.
Entering the destination
(Only available when route guidance is
not active.)
You can enter a destination.
> Call up the options menu for the map
display.
> Press the
Enter destination button.
You can now enter a destination as
described under "The New destination
menu" on page 40 (
Home, Enter address,
Select Point of Interest, Personal
destinations
, Contacts, Route planning,
Select on map or Enter geo-coordinates).
Displaying/selecting different routes
You can use the Navigation device to
display various routes.
> With the entire route displayed, press
the
Alternative button. This function can
also be selected in the options of the
map display, See "Map display options"
on page 86.
After a short time, the map is displayed.
Each route is calculated after each other
and displayed on the map.
The area on the right-hand side shows
the colour key for the individual routes,
the mileage for each route and the
estimated driving time.
You can select the desired route by
pressing the buttons on the right.