User Guide

76
Settings
Language
The text of the touch-screen images can
be displayed in various languages.
Calling up language selection
The following button allows selection
of various different languages.
! Push the button Language.
The language selection appears.
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area
is a contact surface. The individual con-
tact surfaces are marked with the langu-
age designation and the associated nati-
onal flag.
Turn the page
These buttons allow page tur-
ning in the direction shown by the arrow
through the pages of the list.
The current page of the list and the total
number of pages is shown between the
buttons.
Selecting the language
If you change the language the software
restarts.
! Push the contact area of the desired
language.
For safety reasons, the selection is
called up again using the signal Set lan-
guage to .
! In order to accept the selected langua-
ge, push the button .
! In order not to accept the selected lan-
guage, push the button .
Cancelling the language selection
The language selection is closed by
pushing the back button, and the setting
menu then appears.
Moodlight
Using this button, the light bars on the
side can be switched on, switched to red
or blue, or switched off completely.
! Push the button Mood light.
The light bars are controlled accordin-
gly.
9026
9020
7006
5059
5060
Note:
Please deactivate the Becker
moodlights while driving in your
vehicle in order to prevent visual
distraction from the road traffic!
9031
9028
9029