Operating instructions

89
NAVIGATION MODE >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> SK
You can use the and buttons in
the bottom line to scroll through the indi-
vidual stages in the route. As you scroll,
each stage is shown.
You can block the displayed stage by se-
lecting
Clear form.
Press
List view to display the stages in the
route as a list.
The individual stages in the route are dis-
played as a list. To return to the route
guidance, press the top button.
To edit one of the stages, press the
button next to the stage.
The following options are then available:
•Use
Show details to display informa-
tion regarding the selected stage.
•Use
Move up and Move down to
change the order of the stages.
•Use
Delete stage to delete the selected
stage.
•Use
Start guidance to start guidance
for the selected stage.
• You can define the loading time for the
Traffic Assist Pro Z302 with
Set
loading time
.
Skipping destination
If a planned route with several destina-
tions is active, you may delete the current
destination of the route. Route guidance
to the next destination is then started.
This may be necessary if a destination was
not driven to directly. The Traffic Assist
Pro otherwise tries to guide you to the
current destination.
> Call up the options menu for the map
display.
> Press the
Next destination button.
Route guidance to the next destination is
started.
Displaying current position
You can display your current position and
store this position. You can also display
information concerning the current GPS
reception and the current country.
> Open the options menu for the map
display.
> Press the
Position info button.
The current position is displayed. If possi-
ble, an address is displayed. If no address
is available for the current position, the
geographic coordinates are displayed.
You can return to the map using the
Resume button.
By pressing
Save you can store your cur-
rent position in the fast access list.