Operating instructions
Index >>> INDEX Index 2 >D Safety information 5 > GB The Traffic Assist Use 7 7 >F Navigation Music Pictures Video >I >E Unpacking the Traffic Assist Checking the delivery Delivery contents Complaints procedure Handling the packaging >P > NL Description of unit > DK Traffic Assist - basic unit Cable for power supply from cigarette lighter Battery USB connection cable Unit bracket Accessories Mains power supply unit External GPS antenna Headset >S >N > FIN > TR > GR > PL Information about
INDEX Navigation mode What is navigation? Selecting navigation Fast access mode Configuration of fast access mode The destination list Icons used Using fast access mode Start with existing destination Scrolling through stored destinations Displaying or editing a destination Home address Calling up the destination input menu The destination input menu Configuration of the destination input menu Enter address Select Point of Interest Select on map Enter geo-coordinates Route planning Entering the address Sel
>>> INDEX >D Media MP3 player Selecting a track The playback menu Track skip Playback Interrupting playback Track repeat / random play Setting the volume Closing the MP3 player > GB >F >I >E Image viewer >P The image viewer menu Selecting an image Enlarging the image Rotating the picture Displaying image information Slide show Settings > NL > DK >S >N Video player Displaying the video menu Playback Interrupting playback Setting the volume > FIN > TR 71 71 71 73 73 73 73 74 74 74 75 75 76 76 76 7
SAFETY INFORMATION >>> Safety information >D !Safety information • The unit may only be operated if the traffic situation allows for this and if you are absolutely certain that you yourself, your fellow passengers or other road users will not be put at risk, encumbered or disturbed by this. > GB • The rules of applicable road traffic acts must be observed at all times. Destinations may only be input when the vehicle is stationary. >I >F >E • The navigational system is only an aid.
>>> SAFETY INFORMATION • The mains voltages (V) indicated on the mains charger, the car charger adapter and the unit must not be exceeded. Failure to observe this can result in destruction of the unit and the charger as well as explosion of the rechargeable battery. >D > GB • Never open the unit or the rechargeable battery. Any modification to the unit is also impermissible and renders the type approval invalid. >F >I • Use only genuine BECKER original accessories.
THE TRAFFIC ASSIST Use The Traffic Assist Traffic Assist is a high-performance PND (Personal Navigation Device). The Traffic Assist is splash-proof. The accessories such as the unit holder and the charger cable are to be protected against moisture and pollution.
>>> THE TRAFFIC ASSIST Unpacking the Traffic Assist Delivery contents Complaints procedure Please contact your local stockist if you have any complaints. The unit can also be sent directly to Harman/Becker in its original packaging. >D Note: Your Traffic Assist is supplied in stable packaging. Do not unpack the unit in full if you discover any serious damage to the packaging or its content. If this happens, please contact your local stockist.
THE TRAFFIC ASSIST Description of unit The Traffic Assist consists of the basic unit Traffic Assist and the accessories included in the delivery. You will find photos of the individual parts under: • "Overview Traffic Assist" on page 12 Note: The basic unit and accessories must not be opened or modified in any way.
>>> THE TRAFFIC ASSIST USB connection cable You can connect the unit to a standard personal computer having a USB interface using a USB connecting cable. The 2GB flash memory of the Traffic Assist can then be addressed via the PC like a removable storage medium. >D > GB >F >I >E Unit bracket >P The Traffic Assist can be mounted in the vehicle using the unit bracket.
THE TRAFFIC ASSIST Information about documentation Quick start guide The Quick Start Guide is designed to provide a brief introduction to operating your Traffic Assist. The most important basic functions of the Traffic Assist are explained in the Quick Start Guide. Operating instructions A comprehensive explanation of the Traffic Assist functionalities is contained in these operating instructions.
>>> OVERVIEW TRAFFIC ASSIST >D 1 > GB >F >I >E 2 >P > NL > DK 5 >S 4 >N Scope of supply 1 Traffic Assist - PND (Personal Navigation Device) 2 USB connection cable 3 Unit bracket 4 Cable for power supply from car's cigarette lighter (12 volts) 5 TMC antenna Overview Traffic Assist > FIN > TR > GR > PL > CZ >H > SK 12 3
OVERVIEW TRAFFIC ASSIST >>> >D 1 > GB >F >I >E 2 >P > NL > DK 3 4 >S >N Front of unit with controls and displays 1 Touch screen showing the main menu selected 2 Touch screen key Press = activates the corresponding key command 3 Becker button ( ) Press = Back function in most applications Press and hold = switches Traffic Assist on and off > FIN Rear of unit 4 Point for connecting up an external antenna (external antenna not included in the scope of supply) > TR > GR > PL > CZ >H > SK 13
>>> OVERVIEW TRAFFIC ASSIST >D > GB >F 1 >I 2 >E 4 3 >P > NL > DK 5 >S >N > FIN Left side of unit (under cover) 1 SD card slot 2 3.
GENERAL OPERATION Maintenance and care General operation The unit is maintenance-free. For proper care, a commercially available cleansing fluid for electrical devices may be applied using a soft damp cloth. !Danger! Danger to life by electrocution. Always switch off the unit and disconnect the mains power supply unit before cleaning the unit, supplied components, or accessories. Note: Do not use any aggressive or abrasive substances or cloths which may damage the surface.
>>> >D > GB >F >I >E >P > NL > DK >S >N > FIN > TR > GR > PL > CZ >H > SK 16 GENERAL OPERATION Battery quality declaration Display quality declaration The capacity of the rechargeable battery in your mobile navigation system decreases with every charging/discharging cycle. Improper storage at excessively high or low temperatures may also cause a gradual deterioration of capacity. Consequently, the operating time may be substantially reduced even in the case of a fully charged battery.
GENERAL OPERATION Using the battery The internal power supply is via the integrated rechargeable battery. The rechargeable battery is maintenance-free and does not require any particular care. Note: Note that if the battery is completely discharged, it may take up to a minute before the device can be switched on again. Note: In the event of a defective battery, please contact your authorised dealer. Please do not attempt to remove the battery yourself.
>>> >D > GB GENERAL OPERATION Connection to the mains outlet TMC antenna !Danger! The TMC antenna included in the accessories is used to receive traffic announcements. > Push the connector of the TMC antenna into the socket provided on the back of the carrier plate without using excessive force. Ensure that you do not have wet hands and that the power supply unit is dry. Only connect the power supply unit to a permissible mains power supply.
GENERAL OPERATION Connecting up external antenna To enable reception under adverse reception conditions, an external GPS antenna can be connected (not included). For this purpose, a closable connecting socket is located on the rear of the housing. If no external antenna is connected, this connection must always be closed again. Memory card Your Traffic Assist has a slot for a Micro SD memory card.
>>> GENERAL OPERATION Unit bracket >D The Traffic Assist can be attached directly to the windscreen with the unit holder. > GB 1 2 Fitting the unit bracket 6 Note: The Traffic Assist and unit bracket must not be exposed to long periods of direct sunlight. Temperatures inside the vehicle of +70 C and higher may damage parts of the bracket.
GENERAL OPERATION On the windscreen The unit holder can be attached directly to the windscreen using the suction mechanism. > Move the carrier plate 5 onto the four retaining clips of the base 3 . > Select a suitable spot to attach. > Press the base 3 with its suction surface 1 against the windscreen. Turn the unit holder such that the carrier plate is positioned roughly in the desired viewing direction. > Press the lever 2 down. The holder has attached itself firmly to the windscreen.
>>> GENERAL OPERATION >D When the Traffic Assist is started for the first time, the language selection is displayed automatically. > GB The following prompt appears shortly afterwards: Switching off You can switch the unit off at any time. > Press the button for a few seconds. >F >I >E >P Using the buttons, it is possible to scroll through the list in the direction of the relevant arrow. > Press the button for the required language. > The selection is confirmed by pressing OK.
GENERAL OPERATION Basic information about the touch screen The Traffic Assist is fitted with a touch screen. Operation When you touch a button on the touchscreen, the button in question is briefly shown outlined in red to confirm the selection. If you touch a button that is not active at the moment, a short signal tone sounds. Calibration Note: To ensure that the display's surface is not damaged, you may only touch it with your fingers or a blunt, non-smearing object.
>>> GENERAL OPERATION >D Entries made with the entry menu Some applications require entries to be made via the entry menu. The entry menu is operated in a similar way to a keypad. > GB >F Entering characters Characters are entered by pressing the keys in the central area. Scrolling through the lists If you have already entered some of the letters of the selection you want, you can use the selection list to display all the destinations containing the combination of letters in question.
GENERAL OPERATION >>> Other character sets Different character sets can be selected for the keyboard of the Traffic Assist. The selection list appears. >D > GB >F > Press the arrow keys on the right hand side of the screen to scroll through the list. > Press the destination you want. The destination is adopted and the selection list is closed. Special characters and umlauts Special characters and umlauts do not have to used when entering the names of towns and streets.
>>> GENERAL OPERATION Entering numbers Switch to the numbers keyboard in order to enter figures. > Press the button. The numbers keyboard is displayed. >D > GB >F Switching between upper and lower case During free text entry, it is possible to switch between upper/lower case and the automatic function. Deleting characters To delete the last character, use the back key. >I >E >P > To delete the character to the left of the cursor, press the key.
GENERAL OPERATION The Becker key The key is integrated in the bottom left hand corner of the casing. Transferring files Note: Only the maps supplied in the Traffic Assist may be used. The installation or transfer of files or programs which limit or modify the function of the Traffic Assist is prohibited! >>> Transferring using the USB port The USB port is used to link the Traffic Assist directly to a personal computer.
>>> GENERAL OPERATION Transferring cards The installation software on the DVD should be used for data transfer. Data is transferred in the following steps: > Switch off the Traffic Assist. > Connect the Traffic Assist to the computer using the USB cable. > Start the computer and insert the DVD. > Transfer the desired contents of the card using the installation program. > Remove the USB cable correctly. > Switch the Traffic Assist back on. The new card is ready for use immediately.
NAVIGATION MODE What is navigation? Navigation mode The term "navigation" (lat. navigare = to travel by sea) is generally understood to mean the location of a vehicle, the determination of the direction and distance from the desired destination and the determination of the required route. Stars, prominent landmarks, compass and satellites etc. are used as navigation aids. With the Traffic Assist, the location is determined by the GPS receiver.
>>> >D > GB NAVIGATION MODE Selecting navigation Fast access mode Navigation mode is called up from the main menu. In fast access mode, the most recent destinations and saved destinations are displayed and can be selected directly. The destination input menu can also be accessed using the fast access function. >F >I >E >P > In the main menu, press Select destination. The fast access function is called up.
NAVIGATION MODE Icons used The following icons are used in the destination list: Icon Meaning This destination is a standard destination with no special features. This destination is protected. If the destination memory is full, this destination will not automatically be deleted. This can be performed manually, if required. In the case of a protected entry, you can also determine the position using the fast access function. This destination is the current home address.
>>> NAVIGATION MODE Option Meaning Protect entry The destination is protected against automatic deletion. This function is only available in the case of unprotected destinations. Remove Protection of the destinaprotection tion is disabled. This function is only available for protected destinations. Move up The destination is moved forwards by one position. If the destination is moved it is automatically protected. Move down The destination is moved back by one position.
NAVIGATION MODE Configuration of the destination input menu Enter address The various steps from selecting an address to starting route guidance can be carried out using the Enter address button. • See “Entering the address” on page 33. Select Point of Interest Points of interest such as airports and ferry ports, restaurants, hotels, petrol stations or public buildings can be selected and route guidance started using the Select Point of Interest button. • See “Points of interest” on page 38.
>>> >D > GB >F >I >E >P > NL > DK NAVIGATION MODE Selecting a country You can select a country from those available using the button for the country of destination. A country is adopted automatically in the address input menu after selection. If a country of destination has already been entered it will remain until you select a different country. > Press the button for the desired country.
NAVIGATION MODE Selecting a town The destination town can be specified by entering the name or postcode. When you enter the first letter of a town one of the largest towns will automatically be displayed. If you do not wish to accept the suggestion simply enter the subsequent letters of the desired town. The Traffic Assist excludes all impossible letter combinations and postcodes and activates only those letters and numbers that could give the name of an existing town or postcode.
>>> NAVIGATION MODE Selecting the street In the Street menu field the street and house number can be entered separately using a letter and number field. The Traffic Assist excludes all impossible letter combinations and activates only those letters that could give an existing street name. A house number can only be chosen once the street has been selected and if house numbers are included in the data.
NAVIGATION MODE Selecting a house number After entering the destination town and street, you can enter a house number so as to further limit the choice. Note: Instead of entering the house number, you can also enter a junction. However, it is not possible to enter both at the same time. > Press No. The input menu for the house number will appear. > Enter the house number and then press the button.
>>> NAVIGATION MODE If the route guidance is already running you will be asked whether the new destination should replace the old destination or if the new destination should be regarded as a waypoint. >D > GB >F Note: If there is no GPS signal when the route is calculated, the following will be displayed: >I >E >P > NL > Select Add as stopover or Replace old destination.
NAVIGATION MODE >>> Note: You can also press the All categories button. An input menu will then open and you can enter the name of a point of interest directly and confirm it. You can choose between: • a point of interest in the vicinity, • a point of interest near to an address, • a point of interest near to a destination, or • entering a point of interest directly. Point of interest in the vicinity > Press the POI nearby button. For some categories, e.g.
>>> NAVIGATION MODE >D Point of interest near to an address > Press POI near location. > GB >F The points of interest categories available for the entered town are displayed. > Select the desired point of interest as described under “Point of interest in the vicinity” on page 39. Point of interest near to destination > Press the POI nearby button. >I >E > Select the desired country. > In the City or Code field, enter the town where you wish to search for a point of interest.
NAVIGATION MODE name entered. > Select the desired destination from the list. You will now receive additional information about your chosen destination. > Press the Start button to begin route guidance to the point of interest straight away. However, you can also display your chosen point of interest on the map (On map), store it in fast access mode (Save) or display the route to the point of interest (Show route).
>>> NAVIGATION MODE in the vicinity of your chosen point using the POI nearby button. However, you can also store your chosen point in fast access mode (Save) or display the route to the point of interest (Show route). >D > GB >F Coordinate entry You can also enter your destination using geographic coordinates. > Press Enter destination in fast access mode. >I >E >P > NL > Press Enter geo-coordinates in the navigation menu. > DK >S 1 >N > FIN 2 3 > TR > Using 2 select the value you wish to change.
NAVIGATION MODE Route planning The route planning menu allows you to create and select individual routes. To do this, enter the individual destination points for the desired route. It is then possible to travel to these points consecutively without having to enter any further information. You can also optimise the destination points entered and in so doing change their order. > Press Enter destination in fast access mode. > Press the Route planning button.
>>> NAVIGATION MODE >D > GB >F >I > Select the start point or your current position as the start point for route guidance. The individual stages are calculated. A map of the stages will then be displayed. >E >P > NL > DK >S >N > FIN > Press the Start button to start guidance for this route. > TR > GR > PL > CZ >H > SK 44 You can call up the route options using the Options button. You can optimise the order of the destinations to be travelled to by pressing the Optimise button.
NAVIGATION MODE > Press Add stage to enter further intermediate destinations as described above. > When you have entered all intermediate destinations, press the Done button. > Give the route a name of your choice. The stage menu for the new route will be displayed. Editing a route > Select the route you wish to edit. > Press the button in front of the stage you wish to edit. The edit menu will be displayed.
>>> NAVIGATION MODE Navigation settings The navigation settings contain all the settings that are relevant to the navigation functions. >D > GB >F Note: All your settings must be confirmed by pressing the OK button. Using the button, you can exit the current menu at any time without having changed anything. >I >E >P This will take you to the navigation settings menu.
NAVIGATION MODE • Info next destination Display of the estimated time of arrival, distance still to be travelled and time to arrival at your waypoint. • Country info When this function is activated you will automatically receive generally applicable traffic information for the relevant country when you cross a national border (e.g. speed limits). The Route options button You can edit your driving profile in the Route options settings window.
>>> NAVIGATION MODE >D Displaying different route types You can use the Traffic Assist to display previously described routes. > GB Note: This function can only be selected if route guidance is already active or the route option setting was called up from a destination input window. >F >I >E > Press the Show route types on map button. After a short time, the map will appear. The individual routes are calculated one after another and marked on the map.
NAVIGATION MODE The Junction info button In the Junction info settings window you can turn on or off the help available for complex turnings, such as motorway intersections or certain multi-lane roads. > Press Junction info in the settings menu. The Junction info settings window appears. Setting Signposts Meaning When this function is enabled, you receive information regarding traffic signing which you should follow. Note: This information can only be displayed if it is contained in the map material.
>>> NAVIGATION MODE Setting >D > GB >F >I >E >P Rerouting > NL > DK >S >N > FIN > TR > GR > PL Meaning Press the arrow buttons to activate the automatic station search. The currently tuned TMC station is displayed in the adjacent field. This can only be set if the Autoselect station function is switched off. This button allows you to choose whether the route change should be made Never, Automatically or Manually. (See “Taking announcements into consideration when calculating routes” on page 57.
NAVIGATION MODE >>> The Speed info button The Speed info settings window allows you to display speed limits parallel to the navigation. You can also be warned against exceeding the speed limit by an acoustic warning. Selecting Show all POIs displays all points of interest on the map. Selecting Show no POIs displays no points of interest on the map.
>>> NAVIGATION MODE >D To select settings always press the field next to the setting that you wish to change. > GB Setting >F Show signs >I >E >P In city > NL > DK >S Out of city >N > FIN > TR Meaning Select whether speed limits are never displayed, always displayed or only displayed if the limit is exceeded. Select the amount over the speed limit at which you would like to receive an acoustic warning within built-up areas.
NAVIGATION MODE The Volume button With the Volume settings window, you can set the standard volume for voice announcements for each start of the Traffic Assist, or switch off voice announcements completely. Depending on the situation, this setting can be fitted into the map display. > Press Volume in the settings menu. The Time button You can select the time zone relevant for your location in the Time settings window. This setting is important for the correct calculation of the estimated time of arrival.
>>> NAVIGATION MODE The Announce streets button Using the Announce streets button you can switch on or off the announcement of the names of streets into which you are to turn. >D > GB >F Note: This function is not available for all languages/voices. If the function is not available, the button cannot be selected. >I >E >P > Press Announce streets in the settings menu. Depending on the previous setting, the function will be switched on or off.
NAVIGATION MODE Traffic announcements using TMC Provided the TMC antenna is connected, your Traffic Assist can receive traffic announcements (TMC announcements) from radio stations. Note: TMC is not available in all countries (currently only Belgium, Germany, Denmark, France, Italy, the Netherlands, Austria, Sweden, Switzerland and Spain).
>>> NAVIGATION MODE Using TMC Once you have connected the TMC antenna, your Traffic Assist will receive current traffic announcements and dynamic route calculation will be enabled (traffic jam diversion). You can also view traffic announcements directly. Settings for TMC can be made as described under “The TMC button” on page 49. >D > GB >F >I >E >P > NL > DK You can scroll through the list using the arrow keys on the right-hand edge of the screen.
NAVIGATION MODE Display the relevant road in the map > Press the button in the message display. The relevant road can be seen in the map. By pressing the List view button you can return to the message display. You can use the and buttons in the bottom line to scroll through all the messages in the message list and show them on the map. Using the Consider button you can determine for each message whether the stretch of road to which the message relates will be avoided in the route calculation.
>>> NAVIGATION MODE The map display >D The map display is used primarily for route guidance. However, you can also use the map display without route guidance to show your current position and, for example, to receive warnings about exceeding the speed limit. > GB >F >I >E Calling up the map display >P The map display is called up automatically when you start route guidance. Without route guidance, you can call up the map display from the main menu.
NAVIGATION MODE 5 Traffic lane recommendation (only appears on some multi-lane roads; black arrows = recommended lanes) Note: Following the traffic lane recommendations allows you to perform the next driving manoeuvre without changing lanes.
>>> NAVIGATION MODE The display will change to arrow display.
NAVIGATION MODE Map zooming The map can be zoomed into in steps via the zoom buttons. >>> Moving the map You can move the map to any point. > To do this, press the map briefly. >D > GB >F The bar display indicates the volume. > Press or to increase or decrease the volume. > Press in order to mute the announcements. The button will now have a red border. > Press again in order to cancel the mute function. > Press zoom in to “zoom in on the map” and therefore to get closer to the details displayed.
>>> NAVIGATION MODE Map display options In the map display options, you can change the settings for route guidance, the map display and the route. >D > GB You can call up the music mode using the button. Guidance button: >F >I On the map display, press the button on the bottom right. >E >P > NL > DK >S This brings up the options menu for the map display. The Guidance, Map and Route buttons are now available.
NAVIGATION MODE Cancel route guidance You can cancel active route guidance. > Open the options menu for the map display. > Press the Guidance button. > Press the Stop guidance button. This cancels route guidance to all destinations. Enter/delete waypoint With this function, you can enter a waypoint or delete an entered waypoint. > Open the options menu for the map display. > Press the Guidance button. > Press the Add stopover button. tion using the Select destinations button.
>>> >D > GB >F >I >E >P > NL > DK NAVIGATION MODE You can set the route options by pressing the Options button. By pressing the or button you can simulate the entire route quickly or slowly. You can stop the simulation by tapping the screen. You can use the and buttons in the bottom line to scroll through all the directions. To block individual route sections, select Block. The Traffic Assist then calculates a sensible diversion to avoid the blocked section.
NAVIGATION MODE You can use the and buttons in the bottom line to scroll through the individual stages in the route. As you scroll, each stage is shown. You can block the displayed stage by selecting Clear form. Press List view to display the stages in the route as a list. The following options are then available: • Use Show details to display information regarding the selected stage. • Use Move up and Move down to change the order of the stages. • Use Delete stage to delete the selected stage.
>>> NAVIGATION MODE Changing zoom steps and map angle You can choose which zoom steps the map should be changed to when the next manoeuvre is approaching. You can also set the map angle in 3D mode. > Open the options menu for the map display. > Press the Map button. > Press the Map view button. >D > GB >F >I >E >P > NL 1 > DK >S >N > FIN 2 > TR > GR Depending on the current display (3D view 1 or 2D view 2 ) the settings options are different. If you have changed the settings, press OK to save them.
NAVIGATION MODE Changing the orientation of the map (2D) You can select whether the map should always be orientated to the direction of travel, or to the North. Note: This function is only available in 2D mode. > Open the options menu for the map display. > Press the Map button. > Press the North up or Heading up button. The display of the map will change accordingly. Switching 3D buildings on/off In 3D mode, you can select whether or not 3D buildings available in towns should be displayed.
>>> NAVIGATION MODE >D By pressing the Country info button you can display country-specific information such as the maximum permitted speed for the country you are currently in. > GB >F By pressing GPS info you can view information regarding the GPS reception. >I >E >P > NL > DK Point of interest on the route During route guidance, you can display the points of interest located on the route.
NAVIGATION MODE Point of interest near destination/on entire route > In the point of interest on the route menu, press the button to show POIs near the destination, or the button for POIs on the entire route. TMC on the route You can view and edit TMC messages located on your route. > Open the options menu for the map display. > Press the Route button. > Press the TMC on route button. >>> Block route You can block a stretch of road ahead. This determines a certain stretch of road that should not be used.
>>> NAVIGATION MODE Changing route options You can modify the route options (route selection etc.) during route guidance. > Open the options menu for the map display. > Press the Route button. > Press the Options button. >D > GB >F >I >E >P > NL > DK > Set the route options as described under “The Route options button” on page 47. After a change, the route is recalculated.
MEDIA The following functions can be found in the media menu: • MP3 player • Image viewer • Video player • Games The media menu is called up from the main menu. Media > In the main menu, press the Media button MP3 player The MP3 player can play MP3 tracks stored on an inserted Micro SD memory card. >>> Selecting a track Tracks can be selected from the selection menu. >D > GB >F >I >E Press the Music button. If a track is already playing, the playback menu is displayed immediately.
>>> MEDIA • Genres When you select Genres the tracks on the memory card are listed sorted by genre (e.g. rock, pop). • Albums When you select Albums the tracks on the memory card are listed sorted by album. • Folders When you select Folders you can select the tracks according to the folder structure on the memory card. • Songs When you select Songs all the tracks on the memory card are listed in alphabetical order. • Playlists When you select Playlists the playlists on the memory card are listed.
MEDIA The playback menu You can use the playback menu to control the playback of the MP3 tracks.
>>> MEDIA >D Track repeat / random play You can set a track to repeat on a loop, or play the tracks in a random order. > GB >F Setting the volume You can set the volume of the MP3 playback. Closing the MP3 player Pressing the button closes the MP3 player and displays the media menu. !Warning. Note: Please note that music playback will continue, despite leaving the playback menu. Press the pause icon to stop music playback. (See “Interrupting playback” on page 73.
MEDIA Image viewer The image viewer menu In the image viewer menu, you can select images, start a slide show and call up the settings. Note: The image viewer cannot be called up when route guidance is active. The image viewer can display images stored on an inserted Micro SD memory card. The jpg and bmp image formats are supported. >>> A message is displayed stating that the image viewer must not be used when driving. Please observe this warning. > Confirm the message by pressing the OK button.
>>> MEDIA Selecting an image >D > GB >F Press the buttons to the left and right of the image to move to the next or previous image. Press the centre of the image to hide the image menu. Enlarging the image > Show the image menu. > Press the Zoom button. >I >E > In the image viewer menu, select the desired folder, and then the desired image. You can use the and buttons to scroll through the pages of images and folders. The selected image is displayed along with an image menu.
MEDIA Displaying image information > Show the image menu. > Press the EXIF button. Information on the current image is displayed. > Press the button to close the information. >>> Slide show In the slide show, all the pictures in the current folder level are automatically displayed sequentially. > Press Slide show in the image viewer menu. The image display changes to full screen display and initiates the slide show according to the settings made, with the first image in the current folder level.
>>> MEDIA Video player >D Note: The video player cannot be called up when route guidance is active. The video player must not be operated during driving. > GB >F >I >E The video player can display videos stored on an inserted Micro SD memory card. The Traffic Assist supports the MPEG4 Part2 video format with the file extension .avi. >P > NL > DK A message is displayed stating that the video player must not be used when driving. Please observe this warning.
MEDIA Displaying the video menu You can use the video menu to control the playback of the video. > Press the screen when a video is running in full-screen mode. 8 1 2 7 6 5 4 3 The video menu appears.
>>> MEDIA >D Setting the volume You can set the volume of the MP3 playback. > GB !Warning. >F Always adjust the volume so that you can still hear any ambient noise while driving. >I >E > In the playback menu, press the button. >P Games A number of games are available for your entertainment. Note: The games cannot be called up when route guidance is active. The games must not be played during driving. > NL > DK >S >N > Press or to increase or decrease the volume.
EXTRAS Extras contains useful functions for your journey. The following functions are available: • The travel assistant, with a directory of international telephone dialling codes, a unit converter and a directory of international clothing sizes. • World clock • Calculator The extras menu is called up from the main menu. >>> Travel assistant Extras >D In the travel assistant, you can look up international telephone dialling codes, convert units and look up international clothing sizes.
>>> EXTRAS >D International telephone dialling codes > Press International area codes in the travel assistant. > GB 1 2 International clothing sizes > Press Clothing size table in the travel assistant. >F >I >E >P A list of international telephone dialling codes will be displayed. Press the Search button to call up the input menu, which you can use to input the country you are looking for. > NL > DK >S Unit converter > Press Unit converter in the travel assistant.
EXTRAS World clock In the menu, you can display the current time. You can also display the time in two other regions of your choice. The time can be displayed in digital or analogue form. > Press World clock in the extras menu. > Press the World clock button to turn the display of two additional world times on or off . When the function is turned on, three different times will be displayed when the world clock is called up. > Press World clock settings to set which times appear.
>>> EXTRAS Calculator >D You have the option of opening up a convenient calculator. > Press Calculator in the extras menu. > GB >F >I >E 1 >P > NL Press 1 to show additional calculator functions.
SETTINGS Selecting system settings Settings You can change various basic settings for all applications on the Traffic Assist. > In the main menu, press Settings. The system settings menu You can select the various settings options from the system settings menu. >>> Operation >D Selection options Select the desired menu item by pressing the appropriate button. The functionality of the buttons varies depending on the selection and is described under “The individual menu items” on page 86.
>>> SETTINGS The individual menu items >D Battery Your Traffic Assist may be operated using an external power supply unit or an integrated rechargeable battery. > GB >F >I Note: The current charging state is important when operating with a battery. If the battery is low on power, it may not be possible to continue navigation right to the destination. >E >P > NL > DK The power level is shown in the charge display. In the example, the battery still has around two-thirds charge.
SETTINGS Calibration If the touch screen responds incorrectly when buttons are pressed, it needs to be calibrated. Starting the calibration You can start the calibration using the following button: > Press the Calibration button. The calibration procedure will be started. You will be guided through the procedure by means of text instructions. Language The texts on the touch screen can be displayed in a variety of languages.
>>> SETTINGS Automatic on/off The Traffic Assist can switch automatically to sleep mode when the vehicle ignition is switched off. Prerequisite: • The Traffic Assist must be connected to the vehicle cigarette lighter (see also page 17). • The cigarette lighter is de-energized after the ignition is switched off. • The relevant function can be switched on at the Traffic Assist. >D > GB >F >I >E >P > NL > DK Switching the function on / off > Press the Automatic on/off button.
SETTINGS >>> Information The following button displays information regarding the Traffic Assist. >D > GB >F > Press the Information button. The information display appears. >I >E >P > NL > DK >S Note in particular the product designation and the software version. Always quote these details in enquiries to the service provided by Harman/Becker. The Map version information button displays information relating to the installed map data.
>>> SPECIALIST WORDS GMT (Greenwich Mean Time) Central European Time The standard time at 0 degrees of longitude (the longitude which passes through Greenwich, Great Britain). This time is used worldwide for the synchronisation of data collection. Specialist words >D > GB >F >I >E GPS (Global Positioning System) GPS determines your actual geographical position by the use of satellites. It is based on 24 satellites which orbit the Earth and emit signals.
SPECIALIST WORDS >>> TMC (Traffic Message Channel) Traffic announcements transmitted by most FM stations via RDS. Basis for dynamic navigation. >D > GB >F USB (Universal Serial Bus) The Universal Serial Bus (USB) is a bus sytem for interconnection of a computer with external USB peripherals for the exchange of data.
Keywords >>> >D > GB >F KEYWORDS Numerics D F 2D display . . . . . . . . . . . . . . . . . . . . 65 3D building . . . . . . . . . . . . . . . . . . . 67 3D display . . . . . . . . . . . . . . . . . . . . 65 Daylight saving time . . . . . . . . . . . . . 53 Destination from map . . . . . . . . . . . 41 Destination input . . . . . . . . . . . . . . . 32 Destination input menu . . . . . . . . . . 32 Configuration . . . . . . . . . . . . . . 33 Destination list . . . . . . . . . . . . . . . . .
KEYWORDS J Journey time . . . . . . . . . . . . . . . . . . . 59 JPG/JPEG . . . . . . . . . . . . . . . . . . . . . 90 Junction . . . . . . . . . . . . . . . . . . . . . . . 36 L MP3 player . . . . . . . . . . . . . . . . . . . . 71 closing . . . . . . . . . . . . . . . . . . . . 74 Interrupting playback . . . . . . . . . 73 playing . . . . . . . . . . . . . . . . . . . .73 Track skip . . . . . . . . . . . . . . . . . 73 Last announcement . . . . . . . . . . . . . . 60 Lists Destination list . . . . . .
>>> KEYWORDS Settings Navigation . . . . . . . . . . . . . . . . System . . . . . . . . . . . . . . . . . . . Short route . . . . . . . . . . . . . . . . . . . . Simple route . . . . . . . . . . . . . . . . . . . Slide show . . . . . . . . . . . . . . . . . . . . Speed limit . . . . . . . . . . . . . . . . . . . . Street names . . . . . . . . . . . . . . . . . . . Stylus . . . . . . . . . . . . . . . . . . . . . . . . Switching the Traffic Assist on . . . . . System settings . . . . . . . . . . . . . . . .
TECHNICAL DATA Technical Data • Dimensions: (W x H x D) in mm 137 x 90 x 20 • Weight: 241 grams • Processor: 400 MHz Processor CISC-architecture • Screen: 4.3 Inch Touch-Screen with 24 Bit colour depth 16,7 Mio Colours Low reflection values • Storage: 2 GB Flash Storage 64 MB SD-RAM • Micro SD Card Reader: Support up to 4 GB FAT 32 formatted • USB Interface: USB Client 2.0 MINI USB >>> • Headphone output: 3.5 mm Stereo Socket • 1 Internal speakers: 2 Watt max.
>>> NOTICE Dear customer, In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonised national standards. This designation is your guarantee that the unit conforms to the applicable specifications regarding electromagnetic compatibility. This means that interference with other electrical/electronic devices caused by the unit, or interference with this unit caused by other electrical/electronic devices, is largely prevented.
NOTICE >>> Disposal of the unit >D Customer information on the disposal of electrical and electronic devices (private households) In accordance with the self-imposed principles of Harman/Becker Automotive Systems GmbH, the product has been developed and made from high-quality, recyclable materials and components. This symbol on the product and/or accompanying documents means that at the end of their life electrical and electronic products must be disposed of separately from domestic waste.
>>> NOTICE Disposal of the battery >D Duty to supply information according to battery legislation (BattV) > GB Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteries via specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.
NOTICE >>> >D > GB 3 >F 4 >I 1 2 >E >P > NL > DK >S >N > FIN > Completely discharge the battery (leave the unit switched on with no power suppply until it automatically switches off). > Remove the 8 rubber covers 1 from the screw holes. > Unscrew and remove the 8 housing screws 2 using a small cross-slot screwdriver. > Lever off the rear of the housing using a flat-blade screwdriver (levering at the slits at the side of the housing).
