Instructions / Assembly

½” tubing inlet adapter

1.27cm tuberia entrada

adaptador

INSTRUCTIONS

INSTRUCCIONES

Calling Crane Spitter

Grua Ilamamiento Rociadora

NOTES:

•

Connect pump (not included) tubing to spitter inlet.

•

Warning: Allowing the spitter to freeze while running can cause stress cracks, remove and store

during sub-freezing weather

NOTES:

•

Conectar la tuberia de la bomba (no incuido) en el adaptador de la rociadora

•

Advertencia: Si la rociadora se deja congelar cuando esta rociando puede causar grietas y

quebraduras. La rociadora se debe de guadar

durante climas de congelamiento.

MODEL：

：：

：7123710

SAVE THIS MANUAL FOR FUTURE REFERENCE.

CONSERVAR ESTE MANUAL PARA CONSULTAS FUTURAS.

GARDEZ LE MODE D’EMPLOI POUR RÉFÉRENCE ULTÉRIEURE.

Tous

droits

réservés

Recommended pump：

：：

：Beckett M130 130 gph

Bomba recomendado：

：：

：Beckett M130 870 LPH

PAGE 1
MODEL：：7123710 INSTRUCTIONS INSTRUCCIONES Calling Crane Spitter Grua Ilamamiento Rociadora Recommended pump：：Beckett M130 130 gph Bomba recomendado：：Beckett M130 870 LPH ½” tubing inlet adapter 1.27cm tuberia entrada adaptador NOTES: • Connect pump (not included) tubing to spitter inlet.
PAGE 2
LIMITED WARRANTY Each Beckett Corporation (“Beckett”) product is warranted to be free from defects in material and workmanship for the applicable Warranty Period (herein so called) set forth below. The Warranty Period for each product commences on the date of purchase by the original purchaser. The Warranty Periods are as follows: Warranty Period Product Type or Name Warranty Period Product Type or Name Pump Models: Liner Material: FR Series, DP800-1800, G Series, W Series ……………………..