User Manual

so that the mark 2 points at a
larger scale value.
To reduce damping: turn ad-
justing screw using the toolkit
so that the mark 2 points at a
smaller scale value.
Rebound stage, basic
setting, front
Position 5 (Road use with rider
85 kg)
Position 5 (Racing use with
rider 85 kg)
Adjusting compression-
stage damping for rear
wheel
without Dynamic Damping
Control (DDC)
OE
Place the motorcycle on its
stand on firm, even ground.
Adjust the compression-stage
damping by using the adjusting
screw 1.
To increase damping: turn the
adjusting screw in the direction
+ with the toolkit.
To reduce damping: turn the
adjusting screw in the direction
– with the toolkit.
Compression stage, ba-
sic setting, rear
Turn adjusting screw 1 until
the limit position in the direc-
tion +, then turn in direction –
for 5 clicks. (Road use with
rider 85 kg)
Turn adjusting screw 1 until
the limit position in the direc-
tion +, then turn in direction –
for 3 clicks. (Racing use with
rider 85 kg)
Adjusting rebound-stage
damping for rear wheel
without Dynamic Damping
Control (DDC)
OE
6
113
z Adjustment