User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
with riding modes Pro
OE
In the RACE PRO riding
modes: the use of ABS can be
adjusted individually.
with Dynamic Damping Control
(DDC)
OE
DDC
In the RAIN and ROAD riding
modes: setting of the damper
characteristics for comfortable
riding.
In the DYNAMIC riding mode:
setting of the damper charac-
teristics for sporty riding.
In the RACE riding mode: set-
ting of the damper characterist-
ics for riding on the race track.
with riding modes Pro
OE
In the RACE PRO riding
modes: the damper
characteristics can be adjusted
individually.
Mode changes
The riding mode can be changed
while the vehicle is stationary
with the ignition on. It is possible
to change it while driving under
the following conditions:
No drive torque on the rear
wheel.
No brake pressure in the brake
system.
The following steps must be
taken to change the riding mode:
Close the throttle twistgrip.
Release the brake levers.
Deactivate the cruise control.
The desired riding mode is ini-
tially preselected. The mode
change does not take place until
the systems in question are all in
the appropriate state.
The selection menu does not
disappear from the display un-
til the mode change has taken
place.
Dynamic Brake Control
with riding modes Pro
OE
Dynamic Brake Control
function
NOTICE
The Dynamic Brake Control func-
tion is active in all riding modes.
It can only be deactivated in the
RACE PRO riding modes by indi-
vidually adjusting the ABS.
The Dynamic Brake Control
function assists the rider during
emergency braking.
Detection of emergency
braking
Emergency braking is detected
when the front brake is actu-
ated quickly and forcefully.
9
169
z
Engineering details