User Manual
Table Of Contents
- Rider's manual S 1000 RR
- General instructions
- General views
- Status indicators
- Operation
- Ignition switch/steering lock
- Emergency off switch (kill switch)
- Intelligent emergency call
- Lights
- Hazard warning lights system
- Turn indicators
- Dynamic Traction Control (DTC)
- Riding mode
- Cruise-control system
- Hill Start Control
- Gearshift light
- Anti-theft alarm (DWA)
- Tyre pressure monitoring (RDC)
- Heated handlebar grips
- On-board computer
- Front and rear seats
- TFT display
- Adjustment
- Riding
- On the race track
- Displays for racing
- LAPTIMER
- Vehicle settings for racing
- RACE PRO riding modes
- Launch Control
- Pit Lane Limiter
- DTC
- Chassis and suspension settings for racing
- Removing and installing mirrors
- Removing and installing number-plate carrier
- Switching off ABS when riding on the race track
- Deactivating intelligent emergency call when riding on the race track
- Gearshift-pattern reverser
- Engineering details
- Maintenance
- Accessories
- Care
- Technical data
- Service
- Appendix
- Index
an authorised BMW Motorrad
dealer.
Roll rear wheel on the support
into the swinging arm.
Insert brake caliper 1 with
brake-caliper support 2 into the
guide 3 of the swinging arm.
NOTICE
Ensure correct position of brake
line and ABS sensor cable. The
brake line and the ABS sensor
cable must sit in their guides in
order to prevent contact with the
rear wheel or exhaust system.
Roll the rear wheel as far
forward as possible and
loop chain 1 over the chain
sprocket.
Install adjustment plate on the
right 1 in the swinging arm.
10
196
z
Maintenance