User's Guide

Care and maintenance
266
267
To replace the batteries:
1. Remove the battery cover on the back of the Remote.
2. Remove the old batteries.
3. Replace the batteries using the diagram inside showing the
proper direction of the batteries.
4. Replace the battery door. Your Remote is now ready to use.
5. Dispose of the old batteries in accordance with your local
waste disposal regulations.
If your Remote settings were lost, see Section 4.2 on page 57 to
set up your Remote settings.
Cleaning the Remote:
To clean the outside surface of the Remote, use a soft cotton cloth
and water or mild soap-based solutions only.
WARNING:
The Remote is NOT waterproof (rated
IP22). DO NOT immerse it or place it in or near water.
CAUTION:
DO NOT use IV Prep wipes, alcohol wipes,
soap, detergent, or solvents to clean the screen or other parts
of the Remote.
92038.01_IFUCanada.indd 266-267 10/18/18 8:53 AM