User's Guide
Technical Specifications
294
295
Guidance and Manufacturer’s Declaration
Electromagnetic Immunity
(Continued)
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
aected by absorption and reflection from structures, objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV
broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be considered.
Guidance and Manufacturer’s Declaration
Electromagnetic Immunity
(Continued)
a (continued)
If the measured field strength in the location in which the BD Strive™ System is
used exceeds the applicable RF compliance level above, the BD Strive™ System should be
observed to verify normal operation. If abnormal performance is observed, additional
measures may be necessary, such as re-orienting or relocating the BD Strive™ System.
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than [V1] V/m.
92038.01_IFUCanada.indd 294-295 10/18/18 8:53 AM