Specifications

Beech Ovens Page 107 28/07/2011 (C)
RND-REC-RGO Manual (R1) Confidential and Proprietary
Correct positioning: A spark is
generated at the Spark point.
Incorrect positioning: A spark is
generated between the Flame
Ignition probe and the burner body.
Carefully lower the Display burner
from the oven base. Be sure not to
bump the position of the Tri-
electrode when removing and
replacing the burner.
With the Display burner removed the
Tri-electrode and/or burner can be
cleaned and/or adjusted.
Connect the leads securely to the
Tri-electrode correctly and be sure
that it is correctly adjusted before re-
assembly.
Incorrect positioning of the Tri-electrode is also a common cause of erratic Gas
System operation with the Display burner.
Note: Be sure to check that all Gas lines, cabling and bolts are correctly
assembled and secured before turning on power and gas for re-start.