Specifications

Beech Ovens Page 121 28/07/2011 (C)
RND-REC-RGO Manual (R1) Confidential and Proprietary
Oven Materials
The following section describes the most common materials used in the construction
of a Beech Oven. All oven materials are safe to handle when cool.
 The Oven Casing is mild steel with some stainless steel components attached.
 Oven Legs are galvanised steel.
 The Oven Hearth is typically stainless steel or granite. Please check for
custom options.
 The Gas control cabinet is stainless steel.
 The Gas control cabinet components are all standard CE or AS approved
units (various non-ferrous metals) and standard electrical components.
 The Upper oven cavity is high temperature castable with ceramic wool (KA)
insulation between the steel shell and castable material.
 The oven casing is covered with 50mm of ceramic wool insulation.
 The oven base is high alumina clay brick with ceramic board insulation to the
steel housing.
 Any glass that might be incorporated is ceramic glass. (Fire-lite, Borafloat or
Toughened Safety Glass)
 The oven transition to the flue system is galvanised steel.
 The Spray Filter is stainless steel.
The remains of the wood fire should be handled with care. The ash left in the oven
may be hot and it will be dusty. Handle with care.
Debris in the Flue is soot and grease (Creosote, carbon and ash from the cooking
oven).
Disposal of any materials should be confirmed with a local authority as to type of
disposal method suitable and permitted.