Specifications

Beech Ovens Page 14 28/07/2011 (C)
RND-REC-RGO Manual (R1) Confidential and Proprietary
Oven Installation Procedure
Prior to installing the oven, visit the installation area and determine if there are
doorways narrower than the oven in an upright (normal) position. If there are no narrow
doorways, the oven can be kept in the horizontal plane i.e. not tilted on its side to go
through doorways. The oven has been designed to fit through any standard doorway on
its side and to fit in most standard elevators which are capable of the weight.
Lifting Positions
The above diagrams show the positions in which to lift the Base and Upper sections of
the Oven depending on access to the final installation position.
1. Lift here if the Oven Base is to be placed on pallet trolley on its side.
2. Lift here if the Oven Base is to be placed flat onto pallet trolley (pallet).
3. Lift here if the Upper section is to be placed flat onto pallet trolley (pallet).
4. Lift here if the Upper section is to be placed flat after having been transported on
its side.
5. Lift here if the Upper section is to be placed on its side to navigate narrow
passageways.
NOTE: Installation is to be carried out using suitable lifting equipment with
sufficient load capacity to suit the Oven weight. E.g. Hotel crane, mobile crane,
strapping, hooks, etc. Take care when lifting these sections.