Assembly and Operating Instructions DISCOVERY 1000E AND 1000ES SERIES MODELS: BDMG524SA BDMG524BA BDMG424SA BDMG424BA BDMG324SA BDMG324BA FOR OUTDOOR USE ONLY BDMG520SA BDMG520BA BDMG420SA BDMG420BA BDMG320SA BDMG320BA BDBG520SA BDBG420SA BDBG320SA AUSTRALIA / NEW ZEALAND
CONGRATULATIONS CONTENTS IMPORTANT SAFETY INSTRUCTIONS Dear customer, Important safety instructions........................................................3 Congratulations and thank you for choosing our barbecue. We are sure you will find it a pleasure to use. Before you use the barbecue, we recommend that you read through the relevant sections of this manual, which provide a description of your appliance and its functions. Gas cylinder safety information..............................................
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING Failure to follow these instructions and observe the warnings provided in this operations manual could result in fire, explosion or burn hazard, which could cause property damage, personal injury or death. Gas vapour is highly explosive and can cause serious bodily injury or damage to property if allowed to accumulate in a confined space and ignited. This appliance must not be installed under or on any combustible material.
KNOW YOUR BARBECUE GAS CYLINDER SAFETY INFORMATION Gas cylinders must be stored outdoors, out of reach of children and must not be stored in a building, garage or any other enclosed area. FIG 1 Standard POL regulator • This appliance is designed to be used with a gas cylinder not exceeding 9KG (20lbs) capacity. 6 5 • The Gas cylinder must be constructed and marked in accordance with specifications for LP Gas Cylinders.
CONTENTS TROLLEY ASSEMBLY Step 2 Tools Required for Assembly: 4 x ‘D’, 8 x ‘F’, 4 x ‘G’ Phillips Head Screwdriver Ensure magnet attached to the top panel (except for 5 Burners). Step 1 Assemble the panel in between the 4 legs. Ensure the fold with the magnet is facing up and front. 8 x ‘A’, 8 x ‘C’, 4 x ‘D’, 16 x ‘F’, 4 x ‘G’ Remove all loose parts from inside barbecue. Barbecue with hood Place unit hood down onto a soft surface such as blanket to prevent damage.
TROLLEY ASSEMBLY TROLLEY ASSEMBLY Step 5 Step 7 Step 10 General 4 x ‘D’, 8 x ‘F’, 4 x ‘G’, 10 x ‘H’, 10 x ‘I’, 20 x ‘J’ Two of the four casters have stops. Ensure these are fitted at the front of the unit. 2 x ‘E’, 4 x ‘F’, 2 x ‘G’ This barbecue is to be mounted onto a mobile trolley. Attach the Cylinder-Hook on right hand side of BBQ. The Trolley is packed in a separate carton. Please refer to the Trolley instruction booklet for assembly of the trolley, and barbecue mounting.
NATURAL GAS CONVERSION Natural gas installation NOTE: Conversion of this unit to natural gas must be carried out by a qualified licenced person and a Certificate of Compliance must be issued to the owner on completion of the installation conversion. USING YOUR BARBECUE 5. R emove the hose and regulator assembly, and replace the hose and regulator appropriate for the intended gas supply. Connection type is 3/8” SAE Flare with 5/8 - 18 UNF thread.
USING YOUR BARBECUE TECHNICAL INFORMATION After Use Operating the side Side Burner It is a good idea to leave the barbecue on for about 10 minutes after you have finished cooking. This helps to burn away any excess food residues and oil, and makes cleaning easier. Do not use oversized cookware or place cookware off-centre over the burner as this can cause high temperatures in control knob and surrounding panels.
LOCATING YOUR BARBECUE Most importantly, this is an outdoor appliance. Ensure your barbecue is positioned safely away from anything that can catch fire. Outdoors Use Only Under no circumstances is this barbecue to be used indoors. This includes garages or any other enclosed area. Clearance from Combustibles: Ensure your barbecue remains at a distance of at least 45cm (18”) from any combustible material such as wood, gyprock, paper and plants.
INSTALLING YOUR BARBECUE INSTALLING YOUR BARBECUE 1000 SERIES BUILD-IN BBQ INSTRUCTIONS To suit sizes: 3b, 4b and 5b mm Width 3 burner 4 burner 5 burner 675mm 825mm 994mm Height (min) 230mm Depth (including 20mm clearance at rear) 540mm Clearance at rear (min) 75mm Minimum clearance to combustion materials 450mm The Barbecue Cavity Your barbecue has been designed to sit into a cavity or cutout rather than be placed directly onto a flat surface.
CLEANING AND STORING YOUR BARBECUE MAINTENANCE Cleaning Vitreous Enamel Surfaces and Barbecue Control Panel This appliance should be checked and serviced by an authorised service person every 2 years to ensure the appliance remains in a safe operating condition. (These services are not covered by warranty).Replacement parts are available from your authorised BeefEater Dealer. Although porcelain enamel will keep its lustrous finish even under adverse conditions, it still needs regular cleaning.
TROUBLESHOOTING Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: BEEFEATER DISCOVERY BBQ Condition Flame goes out while in use Ignition failure Possible Cause Solution Empty gas cylinder Replace cylinder Air mixed in hoses Re-ignite and allow operating for a short while, till clears out Blockage Seek professional assistance Gas cylinder valve close Turn off knob button, then open the cylinder valve Air mixed in the hoses Re-ignite and allow operating for a short while, till clears
For more information on all Beefeater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: AUSTRALIA phone: 1300 307 939 fax: 1800 356 669 email: customercare@electrolux.com.au web: beefeaterbbq.com NEW ZEALAND phone: 0800 436 245 fax: 0800 225 088 email: customercare@electrolux.co.nz web: beefeaterbbq.com BeefEater. We are part of the Electrolux Family.