Installation manual

Cradle/Handset Units Handset Cradle Unit
20 Apr 2004
5
No special grounding of the Handset Cradle is required.
5.1.2 Handset Cradle Assembly
The Handset Cradle comes with an assembly kit holding the
following parts:
Item Qty Name
1 4 Screw, Sheet screw 3,5 x 25 A4
2 4 Rubber Blind Plug, 3622A
3 1 Relieving Clamp
4 6 Screw 3 x 10 PT Self tapping
5 2 Screw 3 x 6 PT Self tapping
6 1 Blind Plate
Connect the cable and secure the cable using the relieving
clamp (3). A small self-adhesive tape is placed on the PCB
to match the cable together with the cable relief clamp.
Connect the speaker an insert the blind plate (6).