Installation Instructions

Beeman Precision Airguns

5454 Argosy Avenue

Huntington Beach, CA 92649

Voice: 714-890-4800 Fax: 714-890-4808

www.beeman.com

The Golden Rule of Safe Airgun Handling:

Always see that the airgun is pointed in a safe direction!

Treat all airguns as if loaded!

Supersedes all previous information

PN DC-INS –2 REV 0607

Barrel Installation

Instructions

For All Sportsman Series

Knock Down Air Rifles

Caution

DO NOT ATTEMPT ASSEMBLY of your airgun until you have

read these cautions and all printed materials accompanying this

airgun. To use this airgun prior to reading the instructions will

void any warranty and expose you and others to possible harm!

A few minutes now will increase the pleasure you will derive

from this airgun.

If instruction manual and literature are not included with this airgun,

please ask your dealer or contact Beeman Precision Airguns directly

to receive a manual free of charge. The manuals are important to your

safety.

IMPORTANT: This tag must not be removed by anyone except the

retail customer after reading. It contains required warnings and

important information.

PAGE 1
Supersedes all previous information PN DC-INS –2 REV 0607 The Golden Rule of Safe Airgun Handling: Always see that the airgun is pointed in a safe direction! Treat all airguns as if loaded! Barrel Installation Instructions For All Sportsman Series Knock Down Air Rifles Caution DO NOT ATTEMPT ASSEMBLY of your airgun until you have read these cautions and all printed materials accompanying this airgun.
PAGE 2
ASSEMBLY PROCEDURE If your air rifle is taken down into its two component parts, follow these instructions for assembly and for preparing your air rifle for use. 1. Take the provided (4mm) allen key and remove set screw on the bottom of the breech block (Fig. 1) 2. Hold the receiver half of the air rifle in one hand and the barrel half in the other. 3. Position the barrel so that set screw indentation at the end of the barrel is on the underside of the barrel. 4.