Operation Manual

Double lense
camera
OPTION : RX-ECX2412
Transformer 24V -> 12V • 5 amp.
Supllied in the pack RWEC200X/24
6. CONNECTION • RWEC200X • RWEC200X/24
1 • Connect the 20 m. extension cable between monitor and camera.
2 • Plug the wireharness (5 wires) on the monitor
3 • Connect the BLACK wire to the original GROUND of the vehicle
4 • Connect the RED wire to +12V after ignition of the vehicle
5 • Connect the GREEN wire to the +12V Reversing light of the vehicle
VIDEO & AUDIO IN 1
BACKWARD camera connection (with audio)
VIDEO IN 2
REAR VIEW camera connection
LCD monitor 7"
For a 24V vehicle, you need to :
- either chose the pack RWEC99X/24 suplied with the
24/12 Volts transformer
- either buy separately in option the 24 volts transformer
item ref = RX-EC2412.
See how to connect the transformer below
Red
Black
Yellow
Red
Black
Yellow
LCD monitor 7"
Limit lines for
BACKWARD camera only
The backward camera offers limit lines
information to show the obstacle
distance on the monitor through red,
yellow & green lines.
18
S-video plug
to 6 pin
4 pins
connector
to screw
4 pins
connector
to screw
4 pins
connector
to screw
Rearview
camera
Backward
camera with
built-in
microphone
Cable ± 55 cm
Cable ± 45 cm
Cable ± 35 cm
Cable ± 35 cm
Cable ± 20 m
Cable ± 20 m
4 pins
connector
to screw
GREEN • + 12 Volts
Reverse light
Camera activation when reversing
RED • + 12 V after ignition
Monitor activation
BLACK • Ground
Power (-)
INPUT • +24 Volts
AFTER IGNITION vehicle
INPUT
Ground Vehicle
INPUT • + 24 Volts
REVERSING LIGHT Vehicle