SDS

Page 6 of 12
Report No.: 18PNS090101 01001
GUANGDONG UTL CO., LTD.
Lianding Testing Building, No.18 Center Road of Yayuan Industrial Zone, Nancheng District, Dongguan,
Guangdong, China
Tel: [phone] Fax: [phone] E-mail: [e-mail]
Evacuate personnel to safe areas.
Environmental Precautions
Environmental Precautions Refer to protective measures listed in Sections 7 and 8.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Methods and material for containment and cleaning up
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand,
earth or other Non combustible absorbent material. Pick up and transfer to properly labelled containers.
Clean contaminated surface thoroughly.
7. HANDLING AND STORAGE
Precautions for safe handling
Handing Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes
and clothing. Wear personal protective equipment.
Wash thoroughly after handling. Use this material with adequate ventilation.
The Product is not explosive.
Conditions for safe storage, including any incompatibilities
If the Lithium-ion Battery is subject to storage for such a long term as more than 3 months, it is recommended to
recharge the Lithium-ion Polymer Battery Periodically.
3 months: -10°C~ +40°C, 45 to 85% RH
And recommended at 0°C~+35°C for long period storage.
The capacity recovery rate in the delivery state (50% capacity of fully charged) after storage is assumed to be
80% or more.
The voltage for a long time storage shall be 3.7-4.2V range.
Do not storage Lithium-ion Battery haphazardly in a box or drawer where they may short-circuit each other or be
short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Lithium-ion Polymer Battery to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away- Do not smoke.
Store in cool, dry and well-ventilated place.
Incompatible Products
None known.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION