User manual

Symbols on the instrument and in the instruction manual:

Introduction

The UNITEST SF100 is the ideal tracing instrument for sorting out single wires in a

bundle of cables, tracing lines in overhead installations, tracing and finding cables

in walls and assigning fuses. Functioning by means of marking cables under test by

a coded signal which is directly picked up and indicated by the receiver, exact and

sensitive localisation of electrical lines and their identification can be guaranteed.The

set has been built in compliance with the most up-to-date Directives EN 61010, IEC

61010 and ensures safe and reliable operation. The UNITEST SF100 Set is a useful

aid to the electrician on site, the service technician in industry and handicraft or for

hobbyists working in electronics to carry out maintenance work, new installations,

commissioning, and fault finding.

Features

Coded patented technology for quick and accurate :

• Sorting out of single wires in a bundle of cables and trace lines in overhead

Installations.

• Tracing and finding of cables in walls.

• Assigning current circuits to fuses within fuse panels.

• Voltage range up to 250V

• Enables the user to switch between either locating cable lines or fuses.

• Icluding sensitivity adjustment thereby maximizing the accuracy of both tra-

cing and locating

Warning of a potential danger,

comply with users manual.

Equipment protected

throughout by double insulation

or reinforced insulation.

Caution! Dangerous voltage.

Danger of electrical shock.

GS Mark ”Approved Safety”

Government approved in accorde-

ance with GSG hereby authorizes.

Conformity symbol, the instru-

ment complies with the valid di-

rectives. It complies with the

EMC Directive (89/336/EEC)

and the Low Voltage Directive

(73/23/EEC) with their valid

standards.

Reference. Please use utmost

attention.

Symbol for the marking of elec-

trical and electronic equipment

(WEEE Directive 2002/96/EC).

PTDB20250000-00.qxd 30.11.2005 16:12 Uhr Seite 2