User manual

Principle

The UNITEST SF100 Set consists of a transmitter and a receiver. Similar to radio si-

gnals, the UNITEST SF100 functions by means of a coded carrier sending a signal

into the cable or the mains to be localised. By means of the built-in sensor, the re-

ceiver can indicate the transmitted code as a symbol on the display as well as pro-

viding an acoustic signal. The acoustic sound level automatically intensifies as the

source is approached.

Scopy of Supply

1 pc SF100 Transmitter

1 pc SF100 Receiver

1 pc Carrying Case

1 pc Batterie 9 V, IEC 6LR61

1 pc. Instruction Manual

Transport and Storage

Please keep the original packaging for later transport, e.g. for calibration. Any trans-

port damage due to faulty packaging will be excluded from warranty claims. In order

to avoid instrument damage, it is advised to remove accumulators when not using

the instrument over a certain time period. However, should the instrument be con-

taminated by leaking battery cells, you are kindly requested to return it to the facto-

ry for cleaning and inspection. Instruments must be stored in dry and closed areas.

In the case of an instrument being transported in extreme temperatures, a recovery

time of minimum 2 hours is required prior to instrument operation.

Safety measures

The UNITEST SF100 has been constructed in accordance with the safety regulati-

ons for electronic test and measurement instruments and has left the factory in safe

and perfect condition. To maintain this condition, the user must pay attention to the

safety references contained in this instruction manual. This instruction manual con-

tains information and warnings necessary for safe operation and maintenance of

the instrument.

The respective accident prevention regulations established by the professio-

nal associations for electrical systems and equipment must be strictly met at

all times.

In order to avoid electrical shock, the valid safety and VDE regulations regar-

ding excessive contact voltages must receive utmost attention, when wor-

king with voltages exceeding 120V (60V) DC or 50V (25V)rms AC. The valu-

es in brackets are valid for limited ranges (as for example medicine and

agriculture).

PTDB20250000-00.qxd 30.11.2005 16:12 Uhr Seite 3